--- In l..., "Leo Cahalan" wrote:
>
> Does anyone have a very simple program that outputs a message on UART0?
> I am testing a new board and it appears to program correctly using the
> Flash utility, but the program does not execute and is not turning on
> LEDs or outputing data on UART0 as it should. I may not have configured
> the PLL correctly or have some othe problem. I would just like to be
> able to load a known working app to see if the probelm is hardware or
> software related. The board is using a 12MHz crystal.
>
> Thanks,
>
> Leo Cahalan
>
Hi Leo,
The sample programs are available on the LPC site. One of them is for
UART.
http://www.standardics.nxp.com/products/lpc2000/lpc23xx/
Samples on this page.
Suvidh