Hi,
Visit www.revogear.com and repost this message to them nicely. The
userbase for the Kuro Box is clamoring for a decent u-boot port. In
particular, they would like the ability to boot off a HDD-based kernel
instead of the flash-based kernel. But the majority of users are not
sufficiently embedded to be able to do it. And I don't have time ;)
I'm sure Revolution will give you a Kuro if you promise them u-boot,
and the MPC8241 is supported by standard GNU toolchain, precompiled
versions of which are available for download from them.
Reply by Jedi●December 31, 20042004-12-31
If you are looking for a good bootlaoder for your new hardware...
then I am able to help you out with porting u-boot to your platform..
Only requirements:
- Available toolchain for the platform...either free gcc/binutils
or commercial package has to be supplied.
- Sponsoring of at least 1 target platform for the porting service
(quantity depends on the complexity)
For more details and references contact: richard-at-uclinux-net
that's all...no charges (o;
rick