----- Original Message -----
From: "r_kumares"
To:
Sent: Thursday, March 22, 2007 11:26 AM
Subject: [lpc2000] Re: LPC2106 Compiler Error... > Can you please send me the full details..
The program I tried was modified from the original version by Martin Thomas,
so that is probably the same distribution I am using, although I was
probably using an older version (I normally use Crossworks).
Can you please send me the full details..
--- In l..., "Leon" wrote: >
> ----- Original Message -----
> From: "r_kumares"
> To:
> Sent: Thursday, March 22, 2007 9:13 AM
> Subject: [lpc2000] LPC2106 Compiler Error...
> >
> > Dear All,
> >
> > I have started working on LPC2294 using GNU GCC compiler. As > > this is the 1st time I am working on ARM family so
I have just took the > > example code of LPC2106 from the net for blink_led
programme & tried to > > complier the same using the said compiler. Every
time I compile the > > programme it shows the following error.....
> I just tried building a similar program (ledswitch.c - one of the examples > for an Olimex LPC2106 board) with WinARM and it
compiled and linked OK. >
> Leon
>
Reply by Leon●March 22, 20072007-03-22
----- Original Message -----
From: "r_kumares"
To:
Sent: Thursday, March 22, 2007 9:13 AM
Subject: [lpc2000] LPC2106 Compiler Error... >
> Dear All,
>
> I have started working on LPC2294 using GNU GCC compiler. As
> this is the 1st time I am working on ARM family so I have just took the
> example code of LPC2106 from the net for blink_led programme & tried to
> complier the same using the said compiler. Every time I compile the
> programme it shows the following error..... I just tried building a similar program (ledswitch.c - one of the
examples
for an Olimex LPC2106 board) with WinARM and it compiled and linked OK.
Leon
Reply by r_kumares●March 22, 20072007-03-22
Dear All,
I have started working on LPC2294 using GNU GCC compiler. As
this is the 1st time I am working on ARM family so I have just took the
example code of LPC2106 from the net for blink_led programme & tried to
complier the same using the said compiler. Every time I compile the
programme it shows the following error.....
make -k all
"......linking"
arm-elf-ld -v -o main.out main.o crt.o
arm-elf-ld: warning: cannot find entry symbol _start; defaulting to
00008000
crt.o: In function `Reset_Handler':
: undefined reference to `_stack_end'
crt.o: In function `Reset_Handler':
: undefined reference to `_data'
crt.o: In function `Reset_Handler':
: undefined reference to `_bss_start'
crt.o: In function `Reset_Handler':
: undefined reference to `_bss_end'
GNU ld version 2.16.1
make: *** [main.out] Error 1
make: Target `all' not remade because of errors.
Can any one help me to sort out the problem. Awaiting an early reply
from yours end.