On Fri, 12 Dec 2003 10:53:31 +0100, "Amontec Team, Laurent Gauch"
<laurent.gauch@amontecDELETEALLCAPS.com> wrote:

Laurent,

I'm trying to use your wiggler with an Atmel AT91RM9200 device (a 920T
device) on a cogent CSB337 board - but cannot get breakpoints to work
correctly.

Once the first breakpoint is hit I cannot seem to remove it.  I've
used several releases of gdb on various machines with the same result
- does a "real" Raven behave like this?



>Hi Jack,
>
>If you are searching a low cost debug solution, use GNU GCC and GDB 
>tools, and use Chameleon POD at www.amontec.com .
>
>The Chameleon POD can operates as a Wiggler and as a true Raven (8MHz).
>
>Laurent
>
>Jack wrote:
>
>> Hi.
>> 
>> The manual of arm SDT 2.51 mentions their multiICE only, but no wiggler. 
>> Anyone knows if I can use wiggler with ARM std dev. toolkit v.2.51 ?

Hi Jack,

If you are searching a low cost debug solution, use GNU GCC and GDB 
tools, and use Chameleon POD at www.amontec.com .

The Chameleon POD can operates as a Wiggler and as a true Raven (8MHz).

Laurent

Jack wrote:

> Hi.
> 
> The manual of arm SDT 2.51 mentions their multiICE only, but no wiggler. 
> Anyone knows if I can use wiggler with ARM std dev. toolkit v.2.51 ?

Jack <dreamguy007@hotmail.com> wrote:
> Hi.
> 
> The manual of arm SDT 2.51 mentions their multiICE only, but no wiggler. 
> Anyone knows if I can use wiggler with ARM std dev. toolkit v.2.51 ?

SDT 2.5.1 only includes RDI debuggers, ADW and armsd. I don't know of a
converter which will allow you to talk to a wiggler via RDI.

Your best bet is to use the free tools downloadable from

http://www.ocdemon.com/

Which are based on the GNU toolchain.

There are some ICEs with RDI drivers available on the market from companies
such as EPI which you could investigate.

-p
-- 
Paul Gotch
CoreSight Tools
Development Systems ARM Limited.

This message is intended for the addressee(s) only and may contain
information that is the property of, and/or subject to a confidentiality
agreement between the intended recipient(s), their organisation and/or the
ARM Group of Companies. If you are not an intended recipient of this
message, you should not read, copy, forward or otherwise distribute or
further disclose the information in it; misuse of the contents of this
message may violate various laws in your state, jurisdiction or
country. If you have received this message in error, please contact
the originator of this message via email and delete all copies of
this message from your computer or network, thank you.
---------------------------------------------------------------------