Reply by Hans-Bernhard Broeker●February 13, 20052005-02-13
Joseph Casey <joecasey@indigo.ie> wrote:
> Greetings.
> Can I write memory locations with GDB?
I'm pretty sure you can. Even if it doesn't have a special command for
that, something like
set *((unsigned char *) 0x1234567) = 50
at the command line should always work.
> I have been looking through Debugging With GDB and a few tutorials
> but can't find anything - only how to read memory and write to
> variables.
To some extent, that's understandable --- GDB is a source-level
debugger, mainly. I.e. if some piece of memory isn't available as
some variable, then you shouldn't need to fiddle with it, because the
program has no (allowed) way of accessing that memory.
--
Hans-Bernhard Broeker (broeker@physik.rwth-aachen.de)
Even if all the snow were burnt, ashes would remain.
Reply by Joseph Casey●February 12, 20052005-02-12
Greetings.
Can I write memory locations with GDB? I have been looking through
Debugging With GDB and a few tutorials but can't find anything - only
how to read memory and write to variables. I am using GDB 5.1.1 for TI
MSP430 in text mode but I expect the commands would be the same as for
native debugging.
Help appreciated.
Joseph Casey.