Reply by Dezheng Tang June 25, 20072007-06-25
Are the unused I/O pins being terminated? If they are left
input, they are going to draw current from the pad. If not used,
set these IO pins to output high.

Regards,
Tom
--- In l..., "descoubeso" wrote:
>
> Hello,
>
> Dis anyone make measurement on the Vbat pin, when the LPC2103 is
in
> power-down state? (only RTC and its RAM are activated).
> NXP datasheet indicates 7A typical, but it seems to be higher.
>
> Thanks.
>
> Olivier
>

An Engineer's Guide to the LPC2100 Series

Reply by descoubeso June 25, 20072007-06-25
Hello,

Dis anyone make measurement on the Vbat pin, when the LPC2103 is in
power-down state? (only RTC and its RAM are activated).
NXP datasheet indicates 7A typical, but it seems to be higher.

Thanks.

Olivier