Nah !!! be daring !
Go with the PDU format. It's much more fun :) One of the most
inconsistent gsm specifications you're likely to come across.
Seriously though, I suggest you look into including a C library with low
level lpc drivers as the quickest way to get going on serial comms.
newlib_lpc might be a good starting point for your investigations.
________________________________
From: l... [mailto:l...]
On Behalf Of miro_voda_2008
Sent: Saturday, 30 June 2007 7:33 AM
To: l...
Subject: [lpc2000] INTERFACING WITH GSM MODEM
hi all :
iam interfacing a gsm modem with lpc2119 just to send sms .
when i connect the modem to the pc , iam able to write the AT
commands and sending or receiving msg is done
but the problem that i don't now how to connect the modem to the
board
( Uc) and how can write the c code to enter an AT command like "
AT+CMGF=1 "
please if any one has done this send me c code example for this
problem .
reply me to my e mail :
m...@yahoo.com
thanks in advance
