<nvllfarrugia@yahoo.co.uk> wrote in message
news:1109679233.111435.293770@f14g2000cwb.googlegroups.com...
> Hi all
>
> I have a problem using the I2C module found within the WIZ C. I need
> the clock (SCL) to be less than 100kHz. The manual says that there is a
> constant named IIStretch that enables the user to elongate the Data and
> clock pulses with the integer set by this constant. This is done
> because as a default the WIZ C transmits data at 400KHz. Howewver, this
> is not working since I verified with the WIZ C waveform analyser. Any
> suggestions please?
>
> Thank you
>
Hi all
I have a problem using the I2C module found within the WIZ C. I need
the clock (SCL) to be less than 100kHz. The manual says that there is a
constant named IIStretch that enables the user to elongate the Data and
clock pulses with the integer set by this constant. This is done
because as a default the WIZ C transmits data at 400KHz. Howewver, this
is not working since I verified with the WIZ C waveform analyser. Any
suggestions please?
Thank you