+ http://www.SafeRTOS.com
An IEC 61508 compliant real time kernel for safety related systems.
Reply by axl_dudu●August 24, 20072007-08-24
--- In A..., Caglar Akyuz wrote: >
> axl_dudu wrote:
> >
> >
> > Hi everybody (especially Richard),
> > I am using Programmers Notepad and trying to get the FreeRTOS running > > on an AT91SAM7X256 (SAM7-EX256 board). I know I
should begin with the > > demos provided with the FreeRtos but I could
compile any of them as
> > they are all made with Rowley or IAR.
>
> You can compile Rowley demo with GCC happily as all do.
>
> Caglar AKYUZ
>
I'm sorry but it doesn't work. When I try to "make" the project I get
the following message:"*** No rule to make target `all'. Stop."
Reply by Caglar Akyuz●August 24, 20072007-08-24
axl_dudu wrote: > Hi everybody (especially Richard),
> I am using Programmers Notepad and trying to get the FreeRTOS running
> on an AT91SAM7X256 (SAM7-EX256 board). I know I should begin with the
> demos provided with the FreeRtos but I could compile any of them as
> they are all made with Rowley or IAR.
You can compile Rowley demo with GCC happily as all do.
Caglar AKYUZ
Reply by axl_dudu●August 24, 20072007-08-24
Hi everybody (especially Richard),
I am using Programmers Notepad and trying to get the FreeRTOS running
on an AT91SAM7X256 (SAM7-EX256 board). I know I should begin with the
demos provided with the FreeRtos but I could compile any of them as
they are all made with Rowley or IAR. So I have searched the internet
and found a port at this address: http://www.siwawi.arubi.uni-
kl.de/avr_projects/arm_projects/index_at91.html#at91_FreeRTOS1
and addapted it for the X version of the processor. But couldn't make
it work. I have changed the settings for my board but ... nothing.
I don't know where to look now.