> 2. For the LPC21x4 and LPC21x9 there will be a board from Philips /
> Versions without JTAG debugger have been announced @ $149
> Versions with USB - JTAG interface were not quite clear but probably
> below $300
Be advised that the only way to use the board effectively with the Keil
tools is if you have a Keil USB-JTAG interface. uVision doesn't
integrate with (say) gdb+parallel-wiggler.
> The Philips trainer showed the boards already and I am pretty sure the
> Lewin got one of these Philips / Keil boards.
Yes, that's correct. Mine has a couple of patch wires and it doesn't
totally match the documentation, but I don't know what predates what.
The board has two serial interfaces, two CAN interfaces, a JTAG port,
eight LEDs and two buttons.
By the way: I'll be canvassing for suggestions on applications I should
include in the book...
-- Lewin A.R.W. Edwards (http://www.zws.com/)
Learn how to develop high-end embedded systems on a tight budget!