> I actually need to go no more than 100 feet (actually no more than
> about 20, but I've padded that figure). 4.6 Mbits per sec. I need
the
> latency to be at an absolute min (no more than 10mS realistic?)
I would modulate a beam of light.
Reply by Mikal●April 8, 20052005-04-08
I actually need to go no more than 100 feet (actually no more than
about 20, but I've padded that figure). 4.6 Mbits per sec. I need the
latency to be at an absolute min (no more than 10mS realistic?)
Reply by kawshol●April 8, 20052005-04-08
Mikal,
What distance?
4.6 what bit bytes ?
who is the source PC or any other system.
You may consider WUSB if it is short distance it is 40 M bytes for 5
meters specs are being finised.
best Rgards,
kawshol
Reply by Mikal●April 7, 20052005-04-07
Looking for a solution for transfering raw data (4.6 is not
counting the overhead) wirelessly. I'm looking for a module solution,
but would consider a chip.
Im also thinking about what kind of syncronizign scheme to use. My
word lenght will be 24 bits wide.
Any suggestions?