Reply by Neil Wilson April 11, 20052005-04-11
jobhunts02@aol.com wrote:

> I am trying to debug U-Boot using the BDI2000 and gdb. When I enter > "c" for continue, I get "Program received signal SIGSTOP, Stopped > (signal)." (see below) > > Does anyone know what causes this? Thank you. > > > $ /opt/Embedix/tools/bin/powerpc-linux-gdb > GNU gdb 5.1.1 Copyright 2002 Free Software Foundation, Inc. GDB is free > software, covered by the GNU General Public License, and you are > welcome to change it and/or distribute copies of it under certain > conditions. Type "show copying" to see the conditions. > There is absolutely no warranty for GDB. Type "show warranty" for > details. This GDB was configured as "--host=i386-pc-linux-gnu > --target=powerpc-linux". > (gdb) target remote 10.174.100.208:2001 > Remote debugging using 10.174.100.208:2001 > 0xfff00100 in ?? () > (gdb) symbol-file > No symbol file now. > (gdb) add-symbol-file u-boot 0x1fc0000 > add symbol table from file "u-boot" at > .text_addr = 0x1fc0000 > (y or n) y > Reading symbols from u-boot...done. > (gdb) b board_init_r > Breakpoint 1 at 0x1fc4a60: file board.c, line 551. > (gdb) c > Continuing. > > Program received signal SIGSTOP, Stopped (signal). > 0xfff00100 in ?? () > (gdb)
That is the reset vector isn't it ? Has a hardware watchdog gone off in the meantime & reset the board. Cheers. Neil
Reply by April 8, 20052005-04-08
I am trying to debug U-Boot using the BDI2000 and gdb.  When I enter
"c" for continue, I get "Program received signal SIGSTOP, Stopped
(signal)." (see below)

Does anyone know what causes this?  Thank you.


$ /opt/Embedix/tools/bin/powerpc-linux-gdb
GNU gdb 5.1.1 Copyright 2002 Free Software Foundation, Inc. GDB is free
software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain
conditions.  Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for
details.  This GDB was configured as "--host=i386-pc-linux-gnu
--target=powerpc-linux".
(gdb) target remote 10.174.100.208:2001
Remote debugging using 10.174.100.208:2001
0xfff00100 in ?? ()
(gdb) symbol-file
No symbol file now.
(gdb) add-symbol-file u-boot 0x1fc0000
add symbol table from file "u-boot" at
        .text_addr = 0x1fc0000
(y or n) y
Reading symbols from u-boot...done.
(gdb) b board_init_r
Breakpoint 1 at 0x1fc4a60: file board.c, line 551.
(gdb) c
Continuing.

Program received signal SIGSTOP, Stopped (signal).
0xfff00100 in ?? ()
(gdb)