On 2022-08-15, Johann Klammer <klammerj@NOSPAM.a1.net> wrote:
> Good Morning,
>
> I was trying to guess the R_on from the curves in the datasheet
> and got following results:
>
> sinking Ron:
> 3V 1.4Ohm(maybe wrong)
> 5V 30Ohm
>
> sourcing Ron:
> 3V 47Ohm
> 5V 33Ohm
>
> I belive the 3V curve is wrong. It has the
> decimal point of the y axis in the wrong place.
>
> The chart in question is:
> Figure 23-19. I/O Pin Output Voltage versus Sink Current (V CC = 3V)
> on page 171 of Atmel-7701_Automotive-Microcontrollers-ATtiny24-44-84_Datasheet.pdf
>
> Could someone please confirm or deny that?
Have you asked on the avrfreaks forum?
Reply by Johann Klammer●August 15, 20222022-08-15
Good Morning,
I was trying to guess the R_on from the curves in the datasheet
and got following results:
sinking Ron:
3V 1.4Ohm(maybe wrong)
5V 30Ohm
sourcing Ron:
3V 47Ohm
5V 33Ohm
I belive the 3V curve is wrong. It has the
decimal point of the y axis in the wrong place.
The chart in question is:
Figure 23-19. I/O Pin Output Voltage versus Sink Current (V CC = 3V)
on page 171 of Atmel-7701_Automotive-Microcontrollers-ATtiny24-44-84_Datasheet.pdf
Could someone please confirm or deny that?