Hi Fred,

> Is it possible if I just want to compile using Crossworks?

No idea, that's outside my experience domain.

> I'm currently looking for a commercial compiler and I try to
> keep my current working environment.
> If I could develop/compile using Eclipse and debug using your
> GUI, it will be great.

Difficult. :-(

--
Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors Start a New Thread

Hi Paul,

Is it possible if I just want to compile using Crossworks?
I'm currently looking for a commercial compiler and I try to keep my
current working environment.
If I could develop/compile using Eclipse and debug using your GUI, it
will be great.

Fred

--------
Frederic Beaulieu, M.Sc.
Research and Development
Newtrax Technologies Inc.
http://www.newtraxtech.com/

-----Original Message-----
From: m... [mailto:m...] On Behalf
Of Paul Curtis
Sent: Monday, September 11, 2006 6:22 AM
To: m...
Subject: RE: [msp430] Using CrossWorks with Eclipse
Fred,

I think this would be very difficult. It's not a plug-in I'd want to
develop.

--
Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors

> -----Original Message-----
> From: Frederic Beaulieu [mailto:f...@newtraxtech.com]
> Sent: 08 September 2006 21:50
> To: MSP430 Yahoo Groups
> Subject: [msp430] Using CrossWorks with Eclipse
>
> Hi,
>
> do you know if it's possible to use CrossWorks with the
> Eclipse GUI? Is there a command line interface that I can
> incorcorate in a makefile project?
>
> Thanks,
> Fred
>
> ---------------
> Frederic Beaulieu, M.Sc.
> Research and Development
> Newtrax Technologies Inc.
> 3674 Saint-Hubert
> Montreal, Qc, CANADA H2L 4A2
> Tel: (514) 288-6398
> Fax: (514) 221-3417
> Email: f...@newtraxtech.com
> http://www.newtraxtech.com/
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.405 / Virus Database: 268.12.2/441 - Release
> Date: 9/7/2006 Start a New Thread

Fred,

I think this would be very difficult. It's not a plug-in I'd want to
develop.

--
Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors

> -----Original Message-----
> From: Frederic Beaulieu [mailto:f...@newtraxtech.com]
> Sent: 08 September 2006 21:50
> To: MSP430 Yahoo Groups
> Subject: [msp430] Using CrossWorks with Eclipse
>
> Hi,
>
> do you know if it's possible to use CrossWorks with the
> Eclipse GUI? Is there a command line interface that I can
> incorcorate in a makefile project?
>
> Thanks,
> Fred
>
> ---------------
> Frederic Beaulieu, M.Sc.
> Research and Development
> Newtrax Technologies Inc.
> 3674 Saint-Hubert
> Montreal, Qc, CANADA H2L 4A2
> Tel: (514) 288-6398
> Fax: (514) 221-3417
> Email: f...@newtraxtech.com
> http://www.newtraxtech.com/
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.405 / Virus Database: 268.12.2/441 - Release
> Date: 9/7/2006
>
>
>
> Start a New Thread

Hi,

do you know if it's possible to use CrossWorks with the Eclipse GUI? Is
there a command line interface that I can incorcorate in a makefile
project?

Thanks,
Fred

---------------
Frederic Beaulieu, M.Sc.
Research and Development
Newtrax Technologies Inc.
3674 Saint-Hubert
Montreal, Qc, CANADA H2L 4A2
Tel: (514) 288-6398
Fax: (514) 221-3417
Email: f...@newtraxtech.com
http://www.newtraxtech.com/
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.12.2/441 - Release Date: 9/7/2006 Start a New Thread