Check out www.gradconn.com (they have a sales office in Ireland) and www.smp-tech.com
sudhir
From:
r...@yahoogroups.com [mailto:r...@yahoogroups.com]
On Behalf Of Richard Wayman
Sent: Thursday, August 11, 2005
1:51 PM
To:
r...@yahoogroups.com
Subject: Re: [rabbit-semi]
Connectors
We use Samtec connectors for
this and have had no problems. The relevant
Samtec Part No.'s are:
Female SM Header
MMS-117-02-L-DV
Male SM Header
TMM-117-01-L-D-SM
Rich
----- Original Message -----
From: "Mike van Meeteren"
<m...@fastec.com>
To:
<r...@yahoogroups.com>
Sent: Thursday, August 11, 2005 10:02
AM
Subject: Re: [rabbit-semi] Connectors
> At 03:25 PM 8/11/2005 +0000, you
wrote:
> >
> >Simple question - does anyone know
a supplier in the UK
that sells the
> >female mating half of the connector
used on the RCM3000 core module
> >(17x17 2mm IDC PCB mount socket). I
can use either SMT or through hole
> >types, but through hole would be
preffered.
> >
> >RS, Farnell and Digikey dont do
them in the no' of ways needed.
>
> If you're willing to live with the fact
that
you have to be careful when
> you plug the Rabbitcore in, a 2x20 from 3M
would work. We used that
> solution before going direct to Rabbit and
purchasing the correct sockets.
>
> -Mike
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>