On Sat, 21 May 2005 14:23:28 +0200, "Marco Cavallini"
<SiPnAfMo@koansoftware.com> wrote:
>> Im trying to port linux to a custom board i designed (based on the
>> AT91RM9200 ). But im faced with a problem - after the execution of the
>> kernel is started , at the very first instruction , i get an invalid
>> instruction message ( which further prints all the register values)
>> ..what could be the reason for such an error?
>
>You should post the log with the error, else we can't help.
>However I try to guess: did you loaded the filesystem too ?
>
>> Further , what other Free Operatign systems are avaliable that can be
>> used with the AT91RM9200 ?
>
>WindowsCE for example....
>
Since when is WindowsCE Free ?
Depending on exactely what you want, ECOS might be viable.
There is a synthetic target available for Linux, so you can still
develop and run your app on a standard PC, and cross compile
for your ARM board.
Regards
Anton Erasmus
Reply by Marco Cavallini●May 21, 20052005-05-21
> Im trying to port linux to a custom board i designed (based on the
> AT91RM9200 ). But im faced with a problem - after the execution of the
> kernel is started , at the very first instruction , i get an invalid
> instruction message ( which further prints all the register values)
> ..what could be the reason for such an error?
You should post the log with the error, else we can't help.
However I try to guess: did you loaded the filesystem too ?
> Further , what other Free Operatign systems are avaliable that can be
> used with the AT91RM9200 ?
WindowsCE for example....
Best regards
--
Marco Cavallini
=====================================================
Koan s.a.s. - Software Engineering
Linux and WinCE solutions for Embedded and Real-Time Software
Klinux : the embedded distribution for industrial applications
- Atmel AT91 ARM Third Party Consultant
- Intel PCA Developer Network member
- Microsoft Windows Embedded Partner
Via Pascoli, 3 - 24121 Bergamo - ITALIA
Tel. (++39) 035-255.235 - Fax (++39) 178-223.9748
http://www.koansoftware.com - http://www.klinux.org
=====================================================
Reply by Mayank Kaushik●May 21, 20052005-05-21
Hi ,
Im trying to port linux to a custom board i designed (based on the
AT91RM9200 ). But im faced with a problem - after the execution of the
kernel is started , at the very first instruction , i get an invalid
instruction message ( which further prints all the register values)
..what could be the reason for such an error?
Further , what other Free Operatign systems are avaliable that can be
used with the AT91RM9200 ?
Thanks in anticipation