I found the same problem, Blank check sector(s) will return 2
parameters with 1 status code. But in datasheet, they define the
outcoming of IAP_Entry to "unsigned long result[2];"
Or it should be "unsigned long result[3];"?
After Blank check command, result[0] is status code, result[1] is
offset to the first dismatched WORD, and result[2] is the value of the
WORD according to datasheet.
I was wondering if anyone else has had this problem or have any
suggestions? Thanks in advance, any help would be appriciated.
I am having problems with the IAP...when I call the blank check sector
(s) command and the sector is blank I have no problems. If I call it
and it is not blank it seems to corrupt RAM. I have not had any
problems with any of the other IAP commands.