When I started out with AVR CodeVision provided much needed help. I haven't
used it for several years not. That is because I do almost all my AVR
development in Linux Ubuntu.
Mike
--- In a..., "philipman2001" wrote: >
> As a Atmel beginner, which route should I go.
> Should I go with Atmel Studio or go the gcc route with winavr?
>
> Appreciate your opinions?
>
Reply by philipman2001●May 14, 20122012-05-14
I think I will start with winavr.
thanks,
Phil
--- In a..., STEVEN HOLDER wrote: >
> I thought atmel studio used the gcc compiler anyway (or atmels version of
it).
>
> Winavr is just a windows installable collection of the GCC toolset for atmel
devices. Atmel studio 6 has a lot in it including support for the atmel cortex
processors.
>
> The Winavr installation has a decent ide with Programmers notepad
although you will have to do a little reading up on make files.
>
> Must admit i prefer the lighter winavr as opposed to atmel studio, atmel
studio is a big download.
>
> Regards
>
>
>
> ________________________________
> From: philipman2001
> To: a...
> Sent: Monday, 14 May 2012, 11:56
> Subject: [AVR club] Winavr or Atmel Studio 6
>
>
>
> As a Atmel beginner, which route should I go.
> Should I go with Atmel Studio or go the gcc route with winavr?
>
> Appreciate your opinions?
>
>
>
>
>
>
Reply by Imad Ir●May 14, 20122012-05-14
Hi,
I use Code Vision, I fond it good and easy to use, it
generate automatically Mcu Init code & it have links to Avr Studio
for simulation and a lot of programmers, you found with it a lot
of helpful examples.
finally, its your chose
good luck
________________________________
From: philipman2001
To: a...
Sent: Monday, May 14, 2012 1:56 PM
Subject: [AVR club] Winavr or Atmel Studio 6
As a Atmel beginner, which route should I go.
Should I go with Atmel Studio or go the gcc route with winavr?
Appreciate your opinions?
Reply by STEVEN HOLDER●May 14, 20122012-05-14
I thought atmel studio used the gcc compiler anyway (or atmels version of
it).
Winavr is just a windows installable collection of the GCC toolset for atmel
devices. Atmel studio 6 has a lot in it including support for the atmel cortex
processors.
The Winavr installation has a decent ide with Programmers notepad although
you will have to do a little reading up on make files.
Must admit i prefer the lighter winavr as opposed to atmel studio, atmel studio
is a big download.
Regards
________________________________
From: philipman2001
To: a...
Sent: Monday, 14 May 2012, 11:56
Subject: [AVR club] Winavr or Atmel Studio 6
As a Atmel beginner, which route should I go.
Should I go with Atmel Studio or go the gcc route with winavr?
Appreciate your opinions?
Reply by philipman2001●May 14, 20122012-05-14
As a Atmel beginner, which route should I go.
Should I go with Atmel Studio or go the gcc route with winavr?