Yes. thanks is very nice.. =)
--- In m..., "ilogic" wrote: >
> Hi bruce, i've uploaded a file project with I2c memory routines, C
> code is a little bit long but i'm sure is working
> hope it helps you
>
> bye
>
> p.s. files are in member contributions as librerias i2c
>
Hi bruce, i've uploaded a file project with I2c memory routines, C
code is a little bit long but i'm sure is working
hope it helps you
bye
p.s. files are in member contributions as librerias i2c
Reply by mpbwork●June 22, 20072007-06-22
TI's Application Report SLAA208 Interfaces a EEPROM to your
MSP430F169 with I2C. You should be able to use the code as is.
I however use the MSP430FG4618 and ame hoving a devil of a time
converting the code. The I2C is way different. Does anyone have any
I2C C code for the MSP430FG4618? my target device is a DS1624 memory
and thermometer bot any I2C would help.
I prefer to access it directly instead of in a interupt.
Martin
--- In m..., "intelliall" wrote: > hi friends, i need source code please =( IAR
complier..please.
>
> MSN bruce_libra05@... www.intelliall.com
> --- In m..., Alexander Espinosa wrote:
> >
> > hi bruce, i've used 24lc65 from microchip connected to msp430, using > i2c protocol by software, what do you need to
know?
> >
> >
> > ---------------------------------
> > Get the Yahoo! toolbar and be alerted to new email wherever you're > surfing.
> >
> >
>
Reply by intelliall●June 21, 20072007-06-21
Please in "C" =) source code EEPROM MSP430F169 serial.
Bruce
--- In m..., Alexander Espinosa wrote: >
> hi bruce, i've used 24lc65 from microchip connected to msp430, using i2c protocol by software, what do you need to know? >
>
> ---------------------------------
> Get the Yahoo! toolbar and be alerted to new email wherever you're surfing. >
>
>
Reply by intelliall●June 21, 20072007-06-21
hi friends, i need source code please =( IAR complier..please.
MSN b...@hotmail.com www.intelliall.com
--- In m..., Alexander Espinosa wrote: >
> hi bruce, i've used 24lc65 from microchip connected to msp430, using i2c protocol by software, what do you need to know? >
>
> ---------------------------------
> Get the Yahoo! toolbar and be alerted to new email wherever you're surfing. >
>
>
Reply by Alexander Espinosa●June 12, 20072007-06-12
hi bruce, i've used 24lc65 from microchip connected to msp430, using i2c
protocol by software, what do you need to know?
---------------------------------
Get the Yahoo! toolbar and be alerted to new email wherever you're surfing.
Reply by fran...@fchambers.com●June 11, 20072007-06-11
Bruce,
You can also try slaa208. The only tricky bit is the ack_poll to
determine the end of a write. They have a very good routine for this.
You will need to switch the I2C registers around a bit and then back but i
works very well.
Hope this helps,
Frank > Hello Bruce
>
> --- In m..., "intelliall" wrote:
>> Hello, my name is Bruce from PERU.
>>
>> Somebody will have code in C (Compiler IAR MSP430) to communicate
> with
>> a serial EEPROM (anyone) micro MSP430F169.
>>
>> HELPPPPPPPPPPPPPPpppppppppppppp
>>
>> Thanks
>> look for Appnote SLAA115. The Examples are in ASM.
> But the main functions are easy to extract.
>
> Regards Lothar
Reply by testhro●June 11, 20072007-06-11
Hello Bruce
--- In m..., "intelliall" wrote: > Hello, my name is Bruce from PERU.
>
> Somebody will have code in C (Compiler IAR MSP430) to communicate with > a serial EEPROM (anyone) micro MSP430F169.
>
> HELPPPPPPPPPPPPPPpppppppppppppp
>
> Thanks
>
look for Appnote SLAA115. The Examples are in ASM.
But the main functions are easy to extract.
Regards Lothar
Reply by intelliall●June 9, 20072007-06-09
Hello, my name is Bruce from PERU.
Somebody will have code in C (Compiler IAR MSP430) to communicate with
a serial EEPROM (anyone) micro MSP430F169.