Reply by Paul Curtis March 27, 20082008-03-27
Hi,

> Hi every one,
> I have compiled my first very simple project and want to download the
> code via Crossconnect for ARM RTCK interface. It is possible to
> connect to the programmer but when I try to download the code I get
> the error message: Cannot halt target after reset!
>
> Any surgestions ?

I suggest you read the FAQs for a start:

http://ccgi.rowley.co.uk/support/faq.php?do=article&articleid4
http://ccgi.rowley.co.uk/support/faq.php?do=article&articleid=3

-- Paul.

An Engineer's Guide to the LPC2100 Series