Thank you for the reply, after hours of research on google i think i
will use a via mini-itx
with usb or cf GPRS modem.
Thanks again
Andrea
Reply by ●July 8, 20052005-07-08
On 8 Jul, in article
<1120852069.893066.306910@g49g2000cwa.googlegroups.com>
larwe@larwe.com wrote:
>> I need to port an application for pocket pc on a single board computer.
>> The huge problem is gprs connectivity, on the pda(eten p300 gsm/gprs) i
>
>Can't you attach a GPRS-capable cellphone via USB, or perhaps a PCMCIA
>GPRS card?
Recently did some looking on the subject if you look for GSM/GPRS modules
you can find PCMCIA, PC104, serial external and many other variants.
However my basic view is
PCMCIA and USB are commodity products don't expect the
same software and/or hardware model in 6 months time.
A software version control and maintenance nightmare.
PCMCIA on PC104 means getting an adapter board which are
not always supported under wince.
PC104 are available but are expensive 5 - 10 times the
cost of USB/PCMCIA but likely to be around longer.
Not seen much wince support for them.
Serial external, minimal software and with TCP/IP stacks
on some, likely to be around for longer and 2 - 3 times
cost of PCMCIA/USB devices.
Email direct if you want further details.
--
Paul Carpenter | paul@pcserviceselectronics.co.uk
<http://www.pcserviceselectronics.co.uk/> PC Services
<http://www.gnuh8.org.uk/> GNU H8 & mailing list info
<http://www.badweb.org.uk/> For those web sites you hate
Reply by ●July 8, 20052005-07-08
> I need to port an application for pocket pc on a single board computer.
> The huge problem is gprs connectivity, on the pda(eten p300 gsm/gprs) i
Can't you attach a GPRS-capable cellphone via USB, or perhaps a PCMCIA
GPRS card?
Reply by ●July 8, 20052005-07-08
i hope this is not OT.
I need to port an application for pocket pc on a single board computer.
The huge problem is gprs connectivity, on the pda(eten p300 gsm/gprs) i
can easily connect using pocket pc API.
How can i reach this on a sbc?
Is there a ready to use solution, with integrated gprs(with wince
installed)?
Maybe a pc104 sbc with a gprs pc104 module?
Thanks in advance
Andrea