On Tue, 12 Jul 2005 10:00:56 -0500, shoaibali11 <shoaib.ali@and-or.com>
wrote:
> I am new to porting ucOS on an ARM processor so need your help please.
> My application requires Ethernet interfacing with ARM processor, so I
> need
> ucOS with tcp/ip stack. The processor I want to use is SAMSUNG S3C4510B.
> I
> even do not know where to start from as I have no knowledge of ucOS.
"shoaibali11" <shoaib.ali@and-or.com> wrote in message
news:O9SdnUlPZ961Rk7fRVn_vg@giganews.com...
> Hi everybody
> I am new to porting ucOS on an ARM processor so need your help please.
> My application requires Ethernet interfacing with ARM processor, so I need
> ucOS with tcp/ip stack. The processor I want to use is SAMSUNG S3C4510B. I
> even do not know where to start from as I have no knowledge of ucOS. But,
> I can learn very quickly if somebody please guide me. What I need is:
> 1- ucOS with TCP/IP stack
> 2- How to port ucOS on ARM processor
> 3-Tools needed to port
> 4-Tools needed to debug ucOS
> ***5***-Can I run ucOS on my PC to check its functionality, so that once I
> am confirmed with its functionality, Ithen start porting it to ARM
>
> ** I actually have planned to use Samsung's development board for S3C4510B
> processor
> Currently I have SNDS100 board board by Samsung but unfortunately I dont
> have any of its related stuff. I do have MultiICE but I it is not
> supported by this board. If somebody has worked on it please help me.
>
> Regards
> Shoaib Ali
>
>
>
> This message was sent using the comp.arch.embedded web interface on
> www.EmbeddedRelated.com
You should first check the Ports page on the Micrium (uCOS) web site:
http://www.ucos-ii.com/
They have also published application notes for ARM ports (see the
Support\app notes page). AN-1014 has a generic port that supports both ARM
and Thumb mode.
Also check the Samsung site. Many manufacturers have ports for uCOS already
on their site.
Next there is a newsgroup for all Micrium products on Yahoo.
http://groups.yahoo.com/group/MicriumNewsGroup/
Scott
Reply by shoaibali11●July 12, 20052005-07-12
Hi everybody
I am new to porting ucOS on an ARM processor so need your help please
My application requires Ethernet interfacing with ARM processor, so I nee
ucOS with tcp/ip stack. The processor I want to use is SAMSUNG S3C4510B.
even do not know where to start from as I have no knowledge of ucOS. But
I can learn very quickly if somebody please guide me. What I need is:
1- ucOS with TCP/IP stack
2- How to port ucOS on ARM processor
3-Tools needed to port
4-Tools needed to debug ucOS
***5***-Can I run ucOS on my PC to check its functionality, so that once
am confirmed with its functionality, Ithen start porting it to ARM
** I actually have planned to use Samsung's development board for S3C4510
processor
Currently I have SNDS100 board board by Samsung but unfortunately I don
have any of its related stuff. I do have MultiICE but I it is no
supported by this board. If somebody has worked on it please help me.
Regards
Shoaib Ali
This message was sent using the comp.arch.embedded web interface o
www.EmbeddedRelated.com