Thake a look to the FOX board:
www.acmesystems.it
"Greg Brown" <gbrown@nohotmail.com> ha scritto nel messaggio
news:42de587f$0$8417$afc38c87@news.optusnet.com.au...
> Would you recommend any particular embedded HW with the following specs
> and able to run Linux?
>
> ( o ) - 5 x RS232 ports (upto 115200 bits/sec)
> ( o ) - 1 x 10/100 MBits/sec ethernet
> ( o ) - 2 x 8 bits general purpose digital I/O lines (TTL)
> ( o ) - Able to booth from either Support ComaptFlash memory unit or
> USB memory stick
>
> ( o ) - Weight less than 100grams
> ( o ) - Size smaller than 10 cm x 10 cm
> ( o ) - ADC inputs (Optional)
> ( o ) - Low-cost (Desirable :)
>
> Thanks for your guidance
>
> Gregembe
>
Reply by Vadim Borshchev●July 20, 20052005-07-20
On Wed, 20 Jul 2005 23:58:17 +1000, Greg Brown <gbrown@nohotmail.com>
wrote:
> Would you recommend any particular embedded HW with the following specs
> and able to run Linux?
[snip]
I've come across http://www.cdatas.com few days ago. (I have no
affiliation with them whatsoever)
Vadim
Reply by Greg Brown●July 20, 20052005-07-20
Would you recommend any particular embedded HW with the following specs and
able to run Linux?
( o ) - 5 x RS232 ports (upto 115200 bits/sec)
( o ) - 1 x 10/100 MBits/sec ethernet
( o ) - 2 x 8 bits general purpose digital I/O lines (TTL)
( o ) - Able to booth from either Support ComaptFlash memory unit or USB
memory stick
( o ) - Weight less than 100grams
( o ) - Size smaller than 10 cm x 10 cm
( o ) - ADC inputs (Optional)
( o ) - Low-cost (Desirable :)
Thanks for your guidance
Gregembe