Reply by A. P. Richelieu●September 2, 20052005-09-02
"larwe" <larwe@larwe.com> skrev i meddelandet
news:1125452127.836623.182980@f14g2000cwb.googlegroups.com...
>
>> I would like to be able to hot swap the cf while the system is running.
>
> Not supported if you are running the card in True-IDE mode. Read the
> spec.
>
Then again,k the AT91RM9200 does not support True IDE:
The Card detect can be used for hot swap I guess.
--
A. P. Richelieu
Reply by larwe●August 30, 20052005-08-30
> I would like to be able to hot swap the cf while the system is running.
Not supported if you are running the card in True-IDE mode. Read the
spec.
Reply by jtyler●August 30, 20052005-08-30
I am confused, the AT91RM9200 comes with a compact flash interface.
I would like to be able to hot swap the cf while the system is running.
How do I make the interface hot-swappable.
Do I need PCMCIA interface.
Or is there another way to hot swap.
I really thank you for any reply
john
This message was sent using the comp.arch.embedded web interface o
www.EmbeddedRelated.com