Reply by Roland Zitzke●September 21, 20052005-09-21
"bb" <bbkennedy00@yahoo.com> schrieb im Newsbeitrag
news:1125600096.553305.35270@o13g2000cwo.googlegroups.com...
> converter? I expected it to have a clock signal, but I am not getting
> a signal out at all. Is there some sort of command that needs to be
> sent to initialize it?
>
Are you getting any response when sending an 's' or a 't' command?
Is your bus termination set correctly i.e. is the interface able to pull the
clock low at all?
/Roland
http://www.i2c-bus.org
Reply by bb●September 1, 20052005-09-01
Hi all,
Does anybody have any experience working with the Emicros I2C232
converter? I expected it to have a clock signal, but I am not getting
a signal out at all. Is there some sort of command that needs to be
sent to initialize it?
Thanks,
Ben