Reply by Henrique Kawakami●December 8, 20042004-12-08
I had a similar problem with a PIC processor. The block erase operation was
taking too much time to complete, so that watchdog reset the chip...
-Henrique
<pm940@yahoo.com> wrote in message
news:1102498415.253436.183050@f14g2000cwb.googlegroups.com...
>
> My project uses a Philips XA-49 microcontroller. I need to use the
> built-in Flash programming API. I have successfully used it to write
> bytes to flash, but when I request a block erase the call does not
> return.
>
> I am waiting for PWDVLD in the AUXR register.
>
> Does anyone out there have experience with this API on this part?
> Regards,
> Paul.
>
Reply by ●December 8, 20042004-12-08
My project uses a Philips XA-49 microcontroller. I need to use the
built-in Flash programming API. I have successfully used it to write
bytes to flash, but when I request a block erase the call does not
return.
I am waiting for PWDVLD in the AUXR register.
Does anyone out there have experience with this API on this part?
Regards,
Paul.