shall i interface and controll the high voltage device with our low voltage
Msp430.
Thanks and Regards,
S.Sundari
________________________________
From: m... on behalf of Gary Anderson
Sent: Mon 2/11/2008 10:20 AM
To: m...
Subject: Re: [msp430] Reg:MSP430F2370-lcd
Have a look at the initialization sequence. I think you might find you need to
add a second lcdcmd(0x38) with about a 5ms delay between the two.
If the LCD is showing no sign of life at all then you may need to look at the
contrast voltage input.
Gary.
----- Original Message -----
From: ssundari
To: m...
Sent: Monday, February 11, 2008 4:58 PM
Subject: [msp430] Reg:MSP430F2370-lcd
Hi Friends,
I have connected HITACHI lcd parallel with MSP430F2370.In my code controll
signals are working fine
but the data not yet display on LCD.Any one help me to find the error in my code
and give me suggestion to
correct the error.
int main( void )
{
//int i=0;
//unsigned char data[] = {"HI GOOD MORNING"};
// Stop watchdog timer to prevent time out reset
WDTCTL = WDTPW + WDTHOLD;
P2DIR |= 0x0E;
P1DIR |= 0xFF;
//P1OUT &= 0x08;
lcdcmd(0x38); // Init LCD
delay(250);
lcdcmd(0x0C); //Display ON , cursor ON
delay(250);
lcdcmd(0x01); //Clear Screen
delay(250);
lcdcmd(0x06); //shift cursor right
delay(250);
display(1,1,'G');
display(2,1,'H');
I have given 5v input separately from RPS to the LCD
________________________________
From: m... on behalf of Leon
Sent: Mon 2/11/2008 9:50 AM
To: m...
Subject: Re: [msp430] Reg:MSP430F2370-lcd
----- Original Message -----
From: "ssundari"
>
To: >
Sent: Monday, February 11, 2008 3:58 AM
Subject: [msp430] Reg:MSP430F2370-lcd
> Hi Friends,
> I have connected HITACHI lcd parallel with MSP430F2370.In my code
> controll signals are working fine
> but the data not yet display on LCD.Any one help me to find the error in
> my code and give me suggestion to
> correct the error.
Is that LCD suitable for low-voltage operation?
Leon
Reply by Gary Anderson●February 11, 20082008-02-11
Have a look at the initialization sequence. I think you might find you need to
add a second lcdcmd(0x38) with about a 5ms delay between the two.
If the LCD is showing no sign of life at all then you may need to look at the
contrast voltage input.
Gary.
----- Original Message -----
From: ssundari
To: m...
Sent: Monday, February 11, 2008 4:58 PM
Subject: [msp430] Reg:MSP430F2370-lcd
Hi Friends,
I have connected HITACHI lcd parallel with MSP430F2370.In my code controll
signals are working fine
but the data not yet display on LCD.Any one help me to find the error in my
code and give me suggestion to
correct the error.
int main( void )
{
//int i=0;
//unsigned char data[] = {"HI GOOD MORNING"};
// Stop watchdog timer to prevent time out reset
WDTCTL = WDTPW + WDTHOLD;
P2DIR |= 0x0E;
P1DIR |= 0xFF;
//P1OUT &= 0x08;
lcdcmd(0x38); // Init LCD
delay(250);
lcdcmd(0x0C); //Display ON , cursor ON
delay(250);
lcdcmd(0x01); //Clear Screen
delay(250);
lcdcmd(0x06); //shift cursor right
delay(250);
display(1,1,'G');
display(2,1,'H');
----- Original Message -----
From: "ssundari"
To:
Sent: Monday, February 11, 2008 3:58 AM
Subject: [msp430] Reg:MSP430F2370-lcd > Hi Friends,
> I have connected HITACHI lcd parallel with MSP430F2370.In my code
> controll signals are working fine
> but the data not yet display on LCD.Any one help me to find the error in
> my code and give me suggestion to
> correct the error.
Is that LCD suitable for low-voltage operation?
Leon
Reply by ssundari●February 11, 20082008-02-11
Hi Friends,
I have connected HITACHI lcd parallel with MSP430F2370.In my code
controll signals are working fine
but the data not yet display on LCD.Any one help me to find the error in my code
and give me suggestion to
correct the error.
int main( void )
{
//int i=0;
//unsigned char data[] = {"HI GOOD MORNING"};
// Stop watchdog timer to prevent time out reset
WDTCTL = WDTPW + WDTHOLD;
P2DIR |= 0x0E;
P1DIR |= 0xFF;
//P1OUT &= 0x08;
lcdcmd(0x38); // Init LCD
delay(250);
lcdcmd(0x0C); //Display ON , cursor ON
delay(250);
lcdcmd(0x01); //Clear Screen
delay(250);
lcdcmd(0x06); //shift cursor right
delay(250);
display(1,1,'G');
display(2,1,'H');