In comp.arch.embedded,
dfx <mpillai@prodacc.com> wrote:
>Hi,
>
>I'm having issues getting serial comms working with my board; I have
What board?
>traced clean data pulses from the PC serial port to the Atmel CPU, and
>put the CPU into debug mode after a power down cycle plus jumper
>setting. So I know the wires are connected :-)
>
I'm not sure what you mean here. Did you boot from the internal ROM
and got the Xmodem upload to work?
>Need to load u-boot onto the board and so on ... any insights that
>could be shared?
>
You have found Atmel's application note on how to reload U-boot
after it has been lost?
--
Stef (remove caps, dashes and .invalid from e-mail address to reply by mail)
Nothing increases your golf score like witnesses.
Reply by dfx●September 8, 20052005-09-08
Hi,
I'm having issues getting serial comms working with my board; I have
traced clean data pulses from the PC serial port to the Atmel CPU, and
put the CPU into debug mode after a power down cycle plus jumper
setting. So I know the wires are connected :-)
Need to load u-boot onto the board and so on ... any insights that
could be shared?
Thanks,
Manu