> Hi, All.
> We are trying to implement atmega90CAN128. Could anybody advise a program
> (preferably with source ) that would sniff CAN-bus transactions and send
> data to e.g. RS232 port? Or advise why this my desire may be
> unreasonable? Thanks, Alex
Among the cheapest:
http://www.can232.com/
free software is available. Links at above page and at
http://www.canexperts.de/shop.html
Heinz
--
+===================================================================
Merokok dapat menyebabkan kanker, serangan jantung,
impotensi dan gangguan kehamilan dan janin.
Reply by Grant Edwards●September 21, 20052005-09-21
On 2005-09-21, cyberzl1@yahoo.com <cyberzl1@yahoo.com> wrote:
> Do you have prices? It might be early in the morning, but
> their catalog "with pricelist" does not seem to have any.
> I expect the CAN to USB dongle to be fairly cheap.
USB is 239 USD.
The Linux driver works great.
The windows driver, not so great:
1) It can only be opened by one program at a time. If a
second program attempts to open the driver/library it locks
up and then you have to reboot (Win9x) or log-out/log-in (XP).
2) The API is pure busy-wait polling. Either you burn lots of
CPU or you put up with higher latencies.
> The PCI card probably some more, but still reasonable?
259 USD
--
Grant Edwards grante Yow! Am I elected yet?
at
visi.com
Reply by cybe...@yahoo.com●September 21, 20052005-09-21
Do you have prices? It might be early in the morning, but their
catalog "with pricelist" does not seem to have any.
I expect the CAN to USB dongle to be fairly cheap. The PCI card
probably some more, but still reasonable?
JW
Reply by Andy Sinclair●September 21, 20052005-09-21
"Alexander Baranov" <baranov@intech21.com> wrote in message
news:7c201$43304861$44a55b44$5502@msgid.meganewsservers.com...
> Hi, All.
> We are trying to implement atmega90CAN128. Could anybody advise a program
> (preferably with source ) that would sniff CAN-bus transactions and send
> data to e.g. RS232 port? Or advise why this my desire may be
>Hi, All.
>We are trying to implement atmega90CAN128. Could anybody advise a program
>(preferably with source ) that would sniff CAN-bus transactions and send
>data to e.g. RS232 port? Or advise why this my desire may be unreasonable?
For the AT90CAN128 ? Or for a development PC ? If this is the first
time you are using CAN, I would suggest getting hold of a PC CAN Card
with at least minimal software. One needs a another node on a CAN bus
to be able to succefully transmit a message.
Regards
Anton Erasmus
Reply by Alexander Baranov●September 20, 20052005-09-20
Hi, All.
We are trying to implement atmega90CAN128. Could anybody advise a program
(preferably with source ) that would sniff CAN-bus transactions and send
data to e.g. RS232 port? Or advise why this my desire may be unreasonable?
Thanks, Alex