In article <1127399824.362236.147150@f14g2000cwb.googlegroups.com>,
Christof.Abt@hno.atmel.com writes
>Hello folks,
>I'm trying to run the uCOS_II operating system on an AVR 128. The
>compiler I use is the IAR embedded workbench. I compiled all source
>files successfully. Linking fails because of the error
>"Error(e62) File name uCOS_II.r90 used for multiple files.
>There is a uCOS_II.c and auCOS_II.h file. Can anyone tell me in
>more detail what this error means and what I can do to prevent it.
>I'm not a very experienced embedded software guy!
>Thanks in advance for your help.
>
>Christof Abt
>
Are you experienced with C?
DO you know the difference between a.h file and a .c file?
You may be better doing so simple programs and examples without uCOS
before you start of porting an OS.
--
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
\/\/\/\/\ Chris Hills Staffs England /\/\/\/\/
/\/\/ chris@phaedsys.org www.phaedsys.org \/\/\
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
Reply by 42Bastian Schick●September 23, 20052005-09-23
On 22 Sep 2005 07:37:04 -0700, Christof.Abt@hno.atmel.com wrote:
>Hello folks,
>I'm trying to run the uCOS_II operating system on an AVR 128. The
>compiler I use is the IAR embedded workbench. I compiled all source
>files successfully. Linking fails because of the error
>"Error(e62) File name uCOS_II.r90 used for multiple files.
>There is a uCOS_II.c and auCOS_II.h file. Can anyone tell me in
>more detail what this error means and what I can do to prevent it.
>I'm not a very experienced embedded software guy!
>Thanks in advance for your help.
Sounds you did inlcude the .c _and_ .h file in your project.
Only put .c and .sXX files. The headers are found by EWB.
--
42Bastian
Do not email to bastian42@yahoo.com, it's a spam-only account :-)
Use <same-name>@monlynx.de instead !
Reply by ●September 22, 20052005-09-22
Hello folks,
I'm trying to run the uCOS_II operating system on an AVR 128. The
compiler I use is the IAR embedded workbench. I compiled all source
files successfully. Linking fails because of the error
"Error(e62) File name uCOS_II.r90 used for multiple files.
There is a uCOS_II.c and auCOS_II.h file. Can anyone tell me in
more detail what this error means and what I can do to prevent it.
I'm not a very experienced embedded software guy!
Thanks in advance for your help.
Christof Abt