Reply by "Glazar, Bostjan" November 3, 20082008-11-03
Jumping to zero location. Interrupts and some peripherals may stay initialised in this way.

>> I know of two ways .. to put a small number on the watchdog timer and
>> let it time out, or to use one of the output pins to supply a hardware
>> reset (preferably using an external hardware reset superviser). Are
>> there any other options?

An Engineer's Guide to the LPC2100 Series

Reply by kathy_wright_ca October 31, 20082008-10-31
I know of two ways .. to put a small number on the watchdog timer and
let it time out, or to use one of the output pins to supply a hardware
reset (preferably using an external hardware reset superviser). Are
there any other options?

Kathy