Reply by Andrew Tweddle December 12, 20042004-12-12
matt6ft9@terraworld.net wrote:

> Hi Group, > Shouldn't pin 4 on the jtag header (labeled AREF) go to Vcc? > http://www.olimex.com/dev/images/avr-m16-sch.gif > Matt Meerian >
Since I assume this is a break out board, I would assume not. Aref is the voltage reference for the ADC and can be configured several different ways. Check a basic explanation in the Atmega16 datasheet. Andrew
Reply by December 6, 20042004-12-06
Hi Group,
Shouldn't pin 4 on the jtag header (labeled AREF) go to Vcc?
http://www.olimex.com/dev/images/avr-m16-sch.gif
Matt Meerian