--- In m..., "Paul Curtis" wrote:
> Ahh, ok, that's old (from Feb 25 2008). I'll send you a link.

Thank you all, difficulties have gone.
In German: Alles in Butter. ;)

Thank you for the nice photos, Anders!

Regards, Timo

Beginning Microcontrollers with the MSP430

Hi Timo,

> Yes, if its timecode is 26.02.2008 03:26. I do not know a different
> link than this: ...\msp430_crossworks_wavefront_win_i86.zip
> Isn't it the right version:
> Crossworks Release 201.20080225.1248

Ahh, ok, that's old (from Feb 25 2008). I'll send you a link.

--
Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors

Oh yes,
I did promptly.
We are nearing completion...

Thank you!

--- In m..., Joe Radomski wrote:
>
> you are using the wrong link..you will have to ask paul forthe
current link..
> the current version is 2.0.1.2008062301.2253

you are using the wrong link..you will have to ask paul forthe current link..
the current version is 2.0.1.2008062301.2253

--- On Wed, 6/25/08, timokirschke wrote:

From: timokirschke
Subject: [msp430] Re: MSP-FET430UIF - Crossworks cooperation
To: m...
Date: Wednesday, June 25, 2008, 6:12 PM

--- In msp430@yahoogroups. com, "Paul Curtis" wrote:
>
> Did you download the *latest* build

Yes, if its timecode is 26.02.2008 03:26. I do not know a different
link than this: ...\msp430_crosswor ks_wavefront_ win_i86.zip
Isn't it the right version:
Crossworks Release 201.20080225. 1248

> and you *did* right click on the UIF,
> didn't you? Not the PIF?

Hey Paul, I tried all of course. Remember the short video at ATC-
closing. ;)

I will try to remove and reinstall Crossworks, downloaded the Zip
again today.

I found the driver updates from the ATC on my own laptop, and will
try them first.

Thanks,
Timo

--- In m..., "Paul Curtis" wrote:
>
> Did you download the *latest* build

Yes, if its timecode is 26.02.2008 03:26. I do not know a different
link than this: ...\msp430_crossworks_wavefront_win_i86.zip
Isn't it the right version:
Crossworks Release 201.20080225.1248

> and you *did* right click on the UIF,
> didn't you? Not the PIF?

Hey Paul, I tried all of course. Remember the short video at ATC-
closing. ;)

I will try to remove and reinstall Crossworks, downloaded the Zip
again today.

I found the driver updates from the ATC on my own laptop, and will
try them first.

Thanks,
Timo

--- In m..., "Paul Curtis" wrote:
>
> Did you download the *latest* build

Yes, if its timecode is 26.02.2008 03:26. I do not know a different
link than this: ...\msp430_crossworks_wavefront_win_i86.zip
Isn't it the right version:
Crossworks Release 201.20080225.1248

> and you *did* right click on the UIF,
> didn't you? Not the PIF?

Hey Paul, I tried all of course. Remember the short video at ATC-
closing. ;)

I will try to remove and reinstall Crossworks, downloaded the Zip
again today.

Thanks,
Timo

Did you download the *latest* build and you *did* right click on the UIF,
didn't you? Not the PIF?

-- Paul.

> -----Original Message-----
> From: m... [mailto:m...] On Behalf
> Of timokirschke
> Sent: 25 June 2008 17:39
> To: m...
> Subject: [msp430] Re: MSP-FET430UIF - Crossworks cooperation
>
> Excuse me Paul if I'm boring,
>
> Following possibilities if rightclicking on one of the targets:
> Connect, Disconnect, Reconnect,
> Reset, Erase All, Erase Range,
> Download File, Verify File,
> New Target Interface, New Folder,
> Restore Default Targets, Export Target Definitions to XML, Import
> Target Definitions from XML,
> Cut, Copy, Paste, Delete, Raname, Properties.
> No Upgrade at all :(
> Crossworks Release 201.20080225.1248
>
> --- In m..., "Paul Curtis" wrote:
> > No, just right click on the FET target interface in the Targets
> window and
> > Select Upgrade Firmware.
>
>

Excuse me Paul if I'm boring,

Following possibilities if rightclicking on one of the targets:
Connect, Disconnect, Reconnect,
Reset, Erase All, Erase Range,
Download File, Verify File,
New Target Interface, New Folder,
Restore Default Targets, Export Target Definitions to XML, Import
Target Definitions from XML,
Cut, Copy, Paste, Delete, Raname, Properties.
No Upgrade at all :(
Crossworks Release 201.20080225.1248

--- In m..., "Paul Curtis" wrote:
> No, just right click on the FET target interface in the Targets
window and
> Select Upgrade Firmware.

Hi, I use MSP-FET430UIF too. I've installed only the FET430UIF libraries from IAR, that is, the TIUSBFET drivers and then I use GNU mps430-jtag command to program the chip by the next line:

msp430-jtag -l=TIUSB -e -r file.elf

I don't know if I can't attach files, but I'm attaching now the drivers for WinXP.

bye, Esteban

Hi Timo,

> I got the drivers from a student, who installed the Kickstart. It
> works in principle. Now crossworks(?) prompts: "Firmware upgrade
> required" after doubleclicking on the DLL interface. I worry that
> this will end in the same question. Therefore I'll ask TI for the
> actual files by email.

No, just right click on the FET target interface in the Targets window and
Select Upgrade Firmware.

--
Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors