Nick,
It is trying to flash thru ISP mode. Change the project setting to
use the Ulink2 and it will work fine
Regards,
Suren
2008/12/8 Nick Alexeev
> Colleagues,
>
> I can't seem to download the firmware into my chip (LPC2129). Keil
> uVision compiles the code without errors or warnings, but when I try to
> download it with ULINK2, it gives me these error messages:
>
> "LPC210x_ISP.EXE" "C:\Documents and Settings\Administrator\Desktop\arm
> cpp\cpptest01.HEX" 12000 LPC2129 COM1: 9600 1
> --- Error: failed to execute '"LPC210x_ISP.EXE" "C:\Documents and
> Settings\Administrator\Desktop\arm cpp\cpptest01.HEX" 12000 LPC2129
> COM1: 9600 1'
>
> At the same time, I can successfully download BlinkyCAN example using
> the same target and programmer.
>
> Build target 'MCB2100 Flash'
> assembling Startup.s...
> compiling Retarget.c...
> compiling mco.c...
> compiling mcohw_LPC2.c...
> compiling user_LPC2.c...
> compiling BlinkyCAN.c...
> linking...
> Program Size: CodeS40 RO-data504 RW-data ZI-data44
> ".\Flash\BlinkyCAN.axf" - 0 Error(s), 0 Warning(s).
> Load
> "C:\\Keil\\ARM\\Boards\\Keil\\MCB2100\\BlinkyCAN\\Flash\\BlinkyCAN.AXF"
> Erase Done.
> Programming Done.
> Verify OK.
>
> What am I missing?
>
> Any insight or reference will be appreciated!
>
> - Thanks,
> Nick
>
>
>
>
>
--
regards
Surendra Kumar