Reply by peterburdine October 25, 20042004-10-25

--- In , "jrcmx1234" <jr@c...> wrote:
>
> > --- In , "jamesradix1969"
> <jamesradix1969@y...>
> > wrote:
> > >
> > > Has anyone ported CMX RTOS to the LPC family? And by any chance
> > > using the IAR compiler? It seems there is a fair amount of low
> > > level porting that must be done and I was curious if anyone has
> > > already done it.
> > > James
>
> Hi James,
>
> This is JR Rodrigues from CMX. The CMX-RTX RTOS and the CMX-Tiny+
> RTOS have been fully ported to the IAR C tools and the ARM series of
> processors. There is also a kernel awareness module in the IAR C
> tools for the RTOSes. Our url is http://www.cmx.com
>
> Best Regards,
>
> JR

JR,

What about Micronet and the Keil tools? I was having some difficultly
getting it to work and asked if there was an updated port. The
support person told me to do it myself.

--Peter



An Engineer's Guide to the LPC2100 Series

Reply by jrcmx1234 October 25, 20042004-10-25

> --- In , "jamesradix1969"
<jamesradix1969@y...>
> wrote:
> >
> > Has anyone ported CMX RTOS to the LPC family? And by any chance
> > using the IAR compiler? It seems there is a fair amount of low
> > level porting that must be done and I was curious if anyone has
> > already done it.
> > James

Hi James,

This is JR Rodrigues from CMX. The CMX-RTX RTOS and the CMX-Tiny+
RTOS have been fully ported to the IAR C tools and the ARM series of
processors. There is also a kernel awareness module in the IAR C
tools for the RTOSes. Our url is http://www.cmx.com

Best Regards,

JR




Reply by lpc2100_fan October 23, 20042004-10-23

Hi James,

I heard that CMX ports for the LPC are available for the ARM tools
(ADS) and the Keil tools. afaik, IAR has not been ported yet.

Cheers, Bob

--- In , "jamesradix1969" <jamesradix1969@y...>
wrote:
>
> Has anyone ported CMX RTOS to the LPC family? And by any chance
> using the IAR compiler? It seems there is a fair amount of low
> level porting that must be done and I was curious if anyone has
> already done it.
> James




Reply by jamesradix1969 October 23, 20042004-10-23

Has anyone ported CMX RTOS to the LPC family? And by any chance
using the IAR compiler? It seems there is a fair amount of low
level porting that must be done and I was curious if anyone has
already done it.
James