On Thursday 29 January 2009 20:07, robinsm123 wrote:
> I'm thinking of getting a developement board for
either LPC2478 or
> LPC 2468. I just have a few questions regarding a bootloader.
Rolled my own. Just got the pcb from the fab. 2 layers lpc2468 32MB
ram, sd card, ethernet ks8721, 4 serial, usb host + usb and jtag.
Waiting for the solder paste.
>
> 1. Is it possible to completely remove the Phillips boot loader and
> just use my own?
>
> 2. If not, Do I have to jump to sections of the phillips bootloader
> in order to write to flash, or can my bootloader be completely
> independant?
>
> 3. What are some good refernece documents for writing bootloaders
> for LPC.
Boot loader would be one area i would looking closely.
But first to populate and exercise the board.
--
Rgds
JTD