> It's easy to do a HID Joystick from these
sources?
I was able to get the LPCUSB code working in a day on an LPC2148 and with
Windows (and I'm pretty new to this), and the included HID example uses a
joystick as an 'report' example. But ... while the LPCUSB stack works
well on a 2148 more or less out of the box, whether it's 'easy'
to make an HID Joystick really depends on you. Do you know how to work with
interrupts, etc.? I'd say making a USB joystick isn't hard core
rocket science, but there is definately some know-how involved in customising
the HID reports, writing the code to handle the joystick feedback/interrupts,
etc. I can't say whether that's relatively easy for you or not, but
working with GCC (and Rowley's Crossworks in my case) I think LPCUSB is
probably the 'easiest' way to go.
I'm still interested in knowing if the original poster had any luck getting
HID working on the 2468/78 in GCC, though, since I have no real experience
working with Keil extensions, and have been a bit frustrated trying to remove
them all.
It's easy to do a HID Joystick from these sources?
2009/6/16 Kevin Townsend
> > i just foundout i already had an example from the
keil sample tree
> > for the LPC23xx_24xxSampleSoftware.r5. so i'l try that one and than
> > port it to rowley (which i use). when done i'll upload it to the
> > files section.
> >
> > sorry for the mails
> >
> > regards martijn
>
> Martijn:
>
> Were you able to get this working on the 2468? I'm using Crossworks
myself,
> and am always a bit frustrated by the fact that everything produced by NXP
> seems to be full of Keil extensions, etc., though I've noticed in the
past
> couple months that they've added Crossworks projects to a couple
application
> notes.
>
> If you don't mind uploaded this, I suspect a lot of other people would
> appreciate it. I just got HID working on the 2148, but now I need to get it
> running on a 2478 as well.
>
> Kevin
>
>
>
--
Miguel Angel Ajo Pelayo http://www.nbee.es
+34 91 120 1798
+34 636 52 25 69
skype: ajoajoajo
Reply by Kevin Townsend●June 16, 20092009-06-16
> i just foundout i already had an example from the
keil sample tree
> for the LPC23xx_24xxSampleSoftware.r5. so i'l try that one and than
> port it to rowley (which i use). when done i'll upload it to the
> files section.
>
> sorry for the mails
>
> regards martijn
Martijn:
Were you able to get this working on the 2468? I'm using Crossworks
myself, and am always a bit frustrated by the fact that everything produced by
NXP seems to be full of Keil extensions, etc., though I've noticed in the
past couple months that they've added Crossworks projects to a couple
application notes.
If you don't mind uploaded this, I suspect a lot of other people would
appreciate it. I just got HID working on the 2148, but now I need to get it
running on a 2478 as well.
Kevin
Reply by Martijn Broens●February 10, 20092009-02-10
Hi again,
i just foundout i already had an example from the keil sample tree
for the LPC23xx_24xxSampleSoftware.r5. so i'l try that one and than
port it to rowley (which i use). when done i'll upload it to the
files section.
sorry for the mails
regards martijn
--- In l..., "Martijn Broens" wrote: >
> Hi all,
>
>
>
> I know it's been here several times before buts o far i could not fin dan > answer.
>
> I was wondering if there's some sample code for setting up a USB HID in the > LPC2468. perhaps that NXP has some code not yet
published??
>
>
>
> What I'd like to do is set the lpc as a generic hid device using USB_D1 > (P0.30 and P0.29) I've already played with the
lpc2148 works fine, but the > lpc2468 is something different.
>
>
>
> So my question; does anybody have some code and is willing to share or does > anybody know of some good starting point.
>
> The lpusb and tnkernel all cover the smaller parts and sofar I was unable to > port it to the lcp24xx series. Or am I missing
something.
>
>
>
> Any repley is more than welcome
>
>
>
> thanks martijn
>
>
Reply by Martijn Broens●February 10, 20092009-02-10
Hi all,
I know it's been here several times before buts o far i could not fin
dan
answer.
I was wondering if there's some sample code for setting up a USB HID in
the
LPC2468. perhaps that NXP has some code not yet published??
What I'd like to do is set the lpc as a generic hid device using USB_D1
(P0.30 and P0.29) I've already played with the lpc2148 works fine, but
the
lpc2468 is something different.
So my question; does anybody have some code and is willing to share or does
anybody know of some good starting point.
The lpusb and tnkernel all cover the smaller parts and sofar I was unable to
port it to the lcp24xx series. Or am I missing something.