Reply by manikandan palaniappan●November 2, 20042004-11-02
hi,
i am putting jumper at p0.14 to low to enter into bootloadermode and upload
program into flash.then i remove jumper to make p0.14 to high and reset to
execute program,but it won't execute
thanks in advance,
mani
Richard <> wrote:
Are you removing (adding?) the jumper to disable ISP mode?
Richard
--- In , manikandan palaniappan
<aravindar_manikandan@y...> wrote: > hi,
> i am using tinyarm lpc2106 from ramtek.i download the example from donotronics mb40_examples.zip(Dontronics - TinyARM DIP40/50 with
Philips LPC2106/2129 ... websitefor -www.dontronics.com/pasat.html)
for lpc2106.i am using IAR EmbeddedWorkBench version 4.10A for
producing intel hex file and downloading code into flash Using
philips ISP.program executed successfully.we also having lpc2104
board and i want to do the same example by changing project option in
target to lpc2104 chip,compiled and getting intel hex output without
any errors.when i downloaded the program into flash it was downloaded
successfully ,but it is not executing.i am using uart example to
transmit the character typed from keyboard.is there any other setting
to be changed?i also need uart example program for lpc2104. >
> Thanks in advance,
> pl.manikandan
> ---------------------------------
>
Yahoo! Groups Sponsor
Get unlimited calls to
U.S./Canada
---------------------------------
Yahoo! Groups Links
Are you removing (adding?) the jumper to disable ISP mode?
Richard
--- In , manikandan palaniappan
<aravindar_manikandan@y...> wrote: > hi,
> i am using tinyarm lpc2106 from ramtek.i download the example from donotronics mb40_examples.zip(Dontronics - TinyARM DIP40/50 with
Philips LPC2106/2129 ... websitefor -www.dontronics.com/pasat.html)
for lpc2106.i am using IAR EmbeddedWorkBench version 4.10A for
producing intel hex file and downloading code into flash Using
philips ISP.program executed successfully.we also having lpc2104
board and i want to do the same example by changing project option in
target to lpc2104 chip,compiled and getting intel hex output without
any errors.when i downloaded the program into flash it was downloaded
successfully ,but it is not executing.i am using uart example to
transmit the character typed from keyboard.is there any other setting
to be changed?i also need uart example program for lpc2104. >
> Thanks in advance,
> pl.manikandan
> ---------------------------------
>
Reply by manikandan palaniappan●November 2, 20042004-11-02
hi,
i am using tinyarm lpc2106 from ramtek.i download the example from donotronics
mb40_examples.zip(Dontronics - TinyARM DIP40/50 with Philips LPC2106/2129 ...
websitefor -www.dontronics.com/pasat.html)for lpc2106.i am using IAR
EmbeddedWorkBench version 4.10A for producing intel hex file and downloading
code into flash Using philips ISP.program executed successfully.we also having
lpc2104 board and i want to do the same example by changing project option in
target to lpc2104 chip,compiled and getting intel hex output without any
errors.when i downloaded the program into flash it was downloaded successfully
,but it is not executing.i am using uart example to transmit the character typed
from keyboard.is there any other setting to be changed?i also need uart example
program for lpc2104.
Thanks in advance,
pl.manikandan
---------------------------------
