Where can I find the SD spec??
"himassk" <himassk@gmail.com> wrote in message
news:1135161961.784617.74700@z14g2000cwz.googlegroups.com...
> Hi,
>
> In SD memory Physical layer specification Version 1.10 written that:
> Reference to Page no 75, Fig 25 Identification Timing:
>
> The timing for CMD2 and ACMD41 is:
> The command is followed by a period of two Z bits (allowing time for
> direction switching on the bus) and then by P bits pushed up by the
> responding card. The card response to
> the host command starts after NID clock cycles. (NID = 5 clock cycles)
>
> My question is:
> 1. The card has to push P bits exactly after two Z bits or can it take
> more time ?
> 2. The card has to respond to the host command exactly after 5 clock
> cycle ?
>
> Please clarify me.
>
> Regards,
> HimaSSK.
>
Reply by himassk●December 21, 20052005-12-21
Hi,
In SD memory Physical layer specification Version 1.10 written that:
Reference to Page no 75, Fig 25 Identification Timing:
The timing for CMD2 and ACMD41 is:
The command is followed by a period of two Z bits (allowing time for
direction switching on the bus) and then by P bits pushed up by the
responding card. The card response to
the host command starts after NID clock cycles. (NID = 5 clock cycles)
My question is:
1. The card has to push P bits exactly after two Z bits or can it take
more time ?
2. The card has to respond to the host command exactly after 5 clock
cycle ?
Please clarify me.
Regards,
HimaSSK.