Yes....I used the Elprotronic FET-Pro430 lite. It is a very good
utility for downloading the hex file to MSP430 device flash. It even
works with TI's MSP-FET430 PIF or UIF debugger.
Thanks for your support.
--- In m..., "mtxelectronics" wrote: >
> You can not download "hzx" files to the MCU with software other then
> CrossStudio, in your case you will want to select in the code explorer > the "MSP430 Release", select in the project options
that you want to
> compile a Inter Hex (Just one of the many formats you con choose) file > and recompile your code. This will generate a "hex"
file that you can > use externaly. At this point you can use a program
like Elprotronic
> FET-Pro 430 Lite or similar to program the MCU externaly with you FET. >
> --- In m..., "ti2tt" wrote:
> >
> > Hello Forum Members,
> >
> > I am using CrossStudio for MSP430F1611. Using this IDE alongwith TI > > JTAG adapter, I can download the compiled output
file (*.hzx) to the uC > > flash. I want to download this file (*.hzx) to uC
flash without using > > CrossStudio IDE. I will use TI JTAG adapter
(MSP-FET430PIF) as it is. > > Is there any utility to perform this task? Has
anyone tried this? Your > > earliest help in this regard will be highly
appreciated.
> >
> > Thanks in advance.
>
ti2tt wrote: > Hello Forum Members,
>
> I am using CrossStudio for MSP430F1611. Using this IDE alongwith TI
> JTAG adapter, I can download the compiled output file (*.hzx) to the uC
> flash. I want to download this file (*.hzx) to uC flash without using
> CrossStudio IDE. I will use TI JTAG adapter (MSP-FET430PIF) as it is.
> Is there any utility to perform this task? Has anyone tried this? Your
> earliest help in this regard will be highly appreciated.
>
> Thanks in advance.
>
CrossStudio comes with a command-line utility called CrossLoad that you can
use
to download your binary. It is explained in the help files under Utilities
Reference which is under the Command Line Tools heading.
Best regards,
Greg
Reply by mtxelectronics●February 24, 20092009-02-24
You can not download "hzx" files to the MCU with software other then
CrossStudio, in your case you will want to select in the code explorer
the "MSP430 Release", select in the project options that you want to
compile a Inter Hex (Just one of the many formats you con choose) file
and recompile your code. This will generate a "hex" file that you can
use externaly. At this point you can use a program like Elprotronic
FET-Pro 430 Lite or similar to program the MCU externaly with you FET.
--- In m..., "ti2tt" wrote: >
> Hello Forum Members,
>
> I am using CrossStudio for MSP430F1611. Using this IDE alongwith TI
> JTAG adapter, I can download the compiled output file (*.hzx) to the uC
> flash. I want to download this file (*.hzx) to uC flash without using
> CrossStudio IDE. I will use TI JTAG adapter (MSP-FET430PIF) as it is.
> Is there any utility to perform this task? Has anyone tried this? Your
> earliest help in this regard will be highly appreciated.
>
> Thanks in advance.
>
Reply by ti2tt●February 24, 20092009-02-24
Hello Forum Members,
I am using CrossStudio for MSP430F1611. Using this IDE alongwith TI
JTAG adapter, I can download the compiled output file (*.hzx) to the uC
flash. I want to download this file (*.hzx) to uC flash without using
CrossStudio IDE. I will use TI JTAG adapter (MSP-FET430PIF) as it is.
Is there any utility to perform this task? Has anyone tried this? Your
earliest help in this regard will be highly appreciated.