Hi Alex,
i am getting following error:
1. Error: L6406W: No space in execution regions with .ANY selector matching
section .bss (uart0_tx.o (project name))
2. Error: L640W: Sections of aggregate size 0x7d00 bytes could not fit into
.ANY selector(s).
Could you copy and paste it instead, in the body of the message?
Thanks,
Alex
Reply by ravi S●May 14, 20092009-05-14
Hi Alex,
Thanks for your reply.
I tried whatever your mentioned, but still i am getting same error.
Here with i am attaching the Keil option target file.
Please give me the suggestion.
ravi
Reply by Alex Ribero●May 12, 20092009-05-12
Hi:
For Keil uVision, open the "Options for Target" dialog window, select
the "Linker" tab. You have to check the box "Use Memory Layout
from Target Dialog", so that the linker uses the memory you configured.
If that checkbox is not checked, the linker uses a scatter file to allocate the
Flash/RAM. Alternative, you can also edit the scatter file to add the RAM memory
regions for the linker to use. However, the syntax of the scatter file is rather
cumbersome, and needs more knowledge of the region names, etc., but gives you
much more flexibility (for example, to load the code in more that one section of
flash, allocate specific RAM blocks to specific pieces of code, etc)
Regards,
Alex.
Reply by srav...@gmail.com●May 12, 20092009-05-12
Hello,
I am trying to access Ethernet/USB RAM as general purpose SRAM in LPC2378. For
this i configured PCONP initialization of USB & Ethernet Bit in KEIL
compiler i configured IRAM2 address (0x7FD0 0000-1FFF & 0x7FE0 0000-3FFF.
but i am unable to access the USB/Ethernet RAM a general purpose RAM.