<tusunov@my-deja.com> wrote in message
news:1138724250.581541.21940@g44g2000cwa.googlegroups.com...
> what JTAG do you have?
>
> your JTAG should support fuse blow feature to may do so, some JTAGs are
> just for development and have no fuse blow feature
>
> Best regards
> Tsvetan
> ---
> PCB prototypes for $26 at http://run.to/pcb (http://www.olimex.com/pcb)
> PCB any volume assembly (http://www.olimex.com/pcb/protoa.html)
> Development boards for ARM, AVR, PIC, MAXQ2000 and MSP430
> (http://www.olimex.com/dev)
>
Tsvetan, do your (Olimex) parallel port jtag programmers support fuse
blowing?
We've got a few of them - they work well and are good value. (I'm just a
user and not associated with Olimex other than as a customer).
thanks
rob
To program the antifuse you require the TI USB or serial *programming* tool. The TI
FET debugging tool and clones thereof will NOT program the security antifuse.
-Andrew M
"Narottam" <narsingh21@gmail.com> wrote in message
news:ecSdnbZ8DZuFp0LenZ2dnUVZ_t2dnZ2d@giganews.com...
> Hello All,
>
> I am using IAR Embedded Work bench C/C++ compiler for MSP 430 devices. I
> would like to program the fuse of MSP430 chip using JTAG interface. I
> studied from MSP 430 Embedded Workbench User guide, which directed me to
> use the 'Secure' option in the Emulator menu after downloading the
> Software using JTAG interface.
>
>
>
> I downloaded the software using JTAG interface & found that the 'Secure'
> option in the Emulator menu is not enabled. So I could not program the
> fuse.
>
>
>
> 1)How can we enable the 'Secure' option?
> 2)How to program the fuse using JTAG interface?
> 3)How should I proceed?
>
> Thanks in advance.
>
Reply by Narottam●January 31, 20062006-01-31
Hello All,
I am using IAR Embedded Work bench C/C++ compiler for MSP 430 devices. I
would like to program the fuse of MSP430 chip using JTAG interface. I
studied from MSP 430 Embedded Workbench User guide, which directed me to
use the 'Secure' option in the Emulator menu after downloading the
Software using JTAG interface.
I downloaded the software using JTAG interface & found that the 'Secure'
option in the Emulator menu is not enabled. So I could not program the
fuse.
1)How can we enable the 'Secure' option?
2)How to program the fuse using JTAG interface?
3)How should I proceed?
Thanks in advance.