--- In m..., "mpbwork" wrote: >
> Hi Is there any LCD examples on the TI web site for parralell LCD modules like
the ones that use a HD44780 controler or equivalent?
> Not the built in LCD MUX function.
> Any MSP but I use the MSP430FG4618.
> Thanks, I looked but couldent find any.
>
--- In m..., "tintronic" wrote: >
> I don't know what you're looking for that you haven't found, as
the internet is filled with explanations on how to use those displays and
examples on how to use them with just about every type of microcontroller there
is and any inreface flavour: 4 or 8 data bits, with busy_flag detection or delay
routines, with read capabilities or write-only. This forum has many discussions
on how to interface with those displays too.
> Broaden your search. I found all the information I needed on the internet when
I started using those displays. That was over 10 years ago.
>
> Michel K.
>
> --- In m..., "mpbwork" wrote:
> >
> > Hi Is there any LCD examples on the TI web site for parralell LCD modules
like the ones that use a HD44780 controler or equivalent?
> > Not the built in LCD MUX function.
> > Any MSP but I use the MSP430FG4618.
> > Thanks, I looked but couldent find any.
> Hi,
I understand that sometimes it can be a pain in the rear looking for code.
Sometimes it is difficult because the search keys might be different than you
expect.
When I had to do is look at some code for the Pic processor. I have some old
code that you are happy to have (about four years ago I needed to support an LCD
module with a msp430x449). I'm trying to figure out if you can upload
stuff on this site (I'm newly registered)
Marty
Reply by tintronic●June 24, 20092009-06-24
I don't know what you're looking for that you haven't found, as
the internet is filled with explanations on how to use those displays and
examples on how to use them with just about every type of microcontroller there
is and any inreface flavour: 4 or 8 data bits, with busy_flag detection or delay
routines, with read capabilities or write-only. This forum has many discussions
on how to interface with those displays too.
Broaden your search. I found all the information I needed on the internet when I
started using those displays. That was over 10 years ago.
Michel K.
--- In m..., "mpbwork" wrote: >
> Hi Is there any LCD examples on the TI web site for parralell LCD modules like
the ones that use a HD44780 controler or equivalent?
> Not the built in LCD MUX function.
> Any MSP but I use the MSP430FG4618.
> Thanks, I looked but couldent find any.
>
Reply by mpbwork●June 24, 20092009-06-24
Hi Is there any LCD examples on the TI web site for parralell LCD modules like
the ones that use a HD44780 controler or equivalent?
Not the built in LCD MUX function.
Any MSP but I use the MSP430FG4618.
Thanks, I looked but couldent find any.