Reply by Alberto de Martini●July 29, 20092009-07-29
Hi people,
Now I know how to configure, I am using now an panel with HX8238A and I
needed to configure by SPI. I developed and new board similar to OLIMEX but
now with SPI interface connected to the panel. I just send by SPI the
commands I need and is working very well.
The swin.lib can do that to, but modifing the panel registers is much
easier. If somebory is having the same problem that I had, I will be glad to
help.
Best Regards
Alberto de Martini
2009/7/9 Felipe de Andrade Neves Lavratti
> I started to study the SWIM library from nxp site and
I realized that there
> is a simple way of doing that on the configurations files, recomend having
> a
> look on it.
>
> I am not sure if the SWIM lib is complicated or the exemple that is using
> the SWIM is complicated.. I am trying to use it.
>
> 2009/7/8 ljaschko >
> >
> >
> > Hi Alberto,
> >
> > I did mirror change by software, and I think it is possible for 90/270
> grad
> > change.
> >
> > It could be too simple by register :-), if you find please let us know.
> >
> > Regards
> > Vladimir
> >
> > --- In l...
> 40yahoogroups.com>, Alberto de
> > Martini wrote:
> > >
> > > Hi,
> > >
> > > Im working with Olimex Kit I would like to configure the LCD in a
> > diferent
> > > way, for example, change the orientation. I know that there are some
> > > registers that I need to set at the initialization, like Register 01H,
> > but I
> > > dont know how to set it. Im using the IAR software:
> > >
> > > \Program Files\IAR\ARM\examples\NXP\LPC24xx\IAR-LPC-2478\LDC_Demo
> > >
> > > The LCD is working very well, but I cant change the driver setings.
> The
> > LCD
> > > driver is the HX8218.
> > >
> > > Best regards,
> > >
> > > Alberto
> > >
> > >
> > >
> > >
> >
> >
> >
>
>
>
Reply by Felipe de Andrade Neves Lavratti●July 9, 20092009-07-09
I started to study the SWIM library from nxp site and I realized that there
is a simple way of doing that on the configurations files, recomend having a
look on it.
I am not sure if the SWIM lib is complicated or the exemple that is using
the SWIM is complicated.. I am trying to use it.
2009/7/8 ljaschko
> Hi Alberto,
>
> I did mirror change by software, and I think it is possible for 90/270 grad
> change.
>
> It could be too simple by register :-), if you find please let us know.
>
> Regards
> Vladimir
>
> --- In l... , Alberto de
> Martini wrote:
> >
> > Hi,
> >
> > Im working with Olimex Kit I would like to configure the LCD in a
> diferent
> > way, for example, change the orientation. I know that there are some
> > registers that I need to set at the initialization, like Register 01H,
> but I
> > dont know how to set it. Im using the IAR software:
> >
> > \Program Files\IAR\ARM\examples\NXP\LPC24xx\IAR-LPC-2478\LDC_Demo
> >
> > The LCD is working very well, but I cant change the driver setings. The
> LCD
> > driver is the HX8218.
> >
> > Best regards,
> >
> > Alberto
> >
> >
> >
> >
>
Reply by ljaschko●July 8, 20092009-07-08
Hi Alberto,
I did mirror change by software, and I think it is possible for 90/270 grad
change.
It could be too simple by register :-), if you find please let us know.
Regards
Vladimir
--- In l..., Alberto de Martini wrote: >
> Hi,
>
> Im working with Olimex Kit I would like to configure the LCD in a diferent
> way, for example, change the orientation. I know that there are some
> registers that I need to set at the initialization, like Register 01H, but
I
> dont know how to set it. Im using the IAR software:
>
> \Program Files\IAR\ARM\examples\NXP\LPC24xx\IAR-LPC-2478\LDC_Demo
>
> The LCD is working very well, but I cant change the driver setings. The
LCD
> driver is the HX8218.
>
> Best regards,
>
> Alberto
>
>
>
>
Reply by Alberto de Martini●July 6, 20092009-07-06
Hi,
Im working with Olimex Kit I would like to configure the LCD in a diferent
way, for example, change the orientation. I know that there are some
registers that I need to set at the initialization, like Register 01H, but I
dont know how to set it. Im using the IAR software: