kunil <kunilkuda@gmail.com> wrote:

> I though 18MIPS is enough to display static picture.

Actually, anything larger than 0.0 MIPS will be a waste of CPU speed
on a static picture, what with there being exactly _nothing_ left to
do for the CPU once the picture's on the screen ;-)

-- 
Hans-Bernhard Broeker (broeker@physik.rwth-aachen.de)
Even if all the snow were burnt, ashes would remain.

Ouw..I dont know that.

I though 18MIPS is enough to display static picture.

Do you have any reference on MIPS vs JPEG decoding speed ?
Is there any equation that I should know ?

Let's just say, the photo frame should be able to display 3MB JPEG
32-bits (from digicam).

But you're right on the memory. I'm planning to add SRAM to the board.

But if the MIPS is too far (from decoding speed), I'll take your
suggestion to take it to ARM7.

Thank you for your help.
-daniel

Peter,

Check your email, I sent you a copy of what I downloaded since I don't have 
a website to put it on. The FTP site still seems to work, though.

Andrew

"Peter" <meltyb@hotmail.com> wrote in message 
news:dst2mr$7bu$1$8302bc10@news.demon.co.uk...
>
> "andrew queisser" <andrew.queisser at hp com> wrote in message 
> news:43f20942$1@usenet01.boi.hp.com...
>>I don't know about libjpeg, I'm sure it's possible to port with enought 
>>effort, but there are other JPEG decoders that certainly are easy to port. 
>>I ported this decoder: ftp://137.193.64.130/pub/jpeg/pfp.zip to a NIOS
> [snip]
>>
>> I found a couple other libs but this one was so small and easy to grasp 
>> that I went with it.
>>
>> Andrew
>>
> I'd be interested in this code too but the site seems to have gone. Any 
> chance of posting it somewhere?
>
> Peter
> 

kunil wrote:

> So I'm thinking to port libJPEG for ATMega128. But this libJPEG use
> Linux/Unix and 32-bits processors.

No it doesn't. It's simply a piece of C code. I've ported the standard
JPEG6A source (which comprises libjpeg) to many OS-less platforms.

However, the mega128 doesn't have enough RAM to do this job. It's also
too slow (though it would eventually get there, of course). And how do
you display the result?

Use an ARM7.

"andrew queisser" <andrew.queisser at hp com> wrote in message 
news:43f20942$1@usenet01.boi.hp.com...
>I don't know about libjpeg, I'm sure it's possible to port with enought 
>effort, but there are other JPEG decoders that certainly are easy to port. 
>I ported this decoder: ftp://137.193.64.130/pub/jpeg/pfp.zip to a NIOS
[snip]
>
> I found a couple other libs but this one was so small and easy to grasp 
> that I went with it.
>
> Andrew
>
I'd be interested in this code too but the site seems to have gone. Any 
chance of posting it somewhere?

Peter 

I don't know about libjpeg, I'm sure it's possible to port with enought 
effort, but there are other JPEG decoders that certainly are easy to port. I 
ported this decoder: ftp://137.193.64.130/pub/jpeg/pfp.zip to a NIOS 
processor. I'm not sure how good this decoder is compared to the reference 
implementation or libjpeg but it did work on several of my test images and 
it's a breeze to port. Just replace win.c with your main program and you're 
done. The code in pfp.c will try to open a file stored in the "filename" 
string and return pixels in the "bgr" array. "hdim and "vdim" is the size of 
the result image in the bgr array.

I found a couple other libs but this one was so small and easy to grasp that 
I went with it.

Andrew

"kunil" <kunilkuda@gmail.com> wrote in message 
news:1139886368.020670.179280@g47g2000cwa.googlegroups.com...
>
> Hi all,
>
> I just want to ask..in theory is it possible to port algorithm only
> software to bare board ?
>
> I have ATMega128 connected to graphic LCD. I want to make an electronic
> picture/photo frame (so I can change the photo using SDCARD or other
> solid state disk). So I need to have JPEG decoder (the GPL ones..since
> this is just for my fun..).
>
> So I'm thinking to port libJPEG for ATMega128. But this libJPEG use
> Linux/Unix and 32-bits processors.
>
> So, my second question is : did anyone have some success for this idea
> ? :-)
>
> Thank you so much for your help.
>
> -daniel
> 

kunil <kunilkuda@gmail.com> wrote:

> Hi all,

> I just want to ask..in theory is it possible to port algorithm only
> software to bare board ?

I think you mean "can I port C code to my microcontroller" and the
answer is yes.

It depends on your coding ability and the complexity of the software.

> I have ATMega128 connected to graphic LCD. I want to make an electronic
> picture/photo frame (so I can change the photo using SDCARD or other
> solid state disk). So I need to have JPEG decoder (the GPL ones..since
> this is just for my fun..).

It might be easier to just read bitmaps :)

ttyl,

--buddy

Hi all,

I just want to ask..in theory is it possible to port algorithm only
software to bare board ?

I have ATMega128 connected to graphic LCD. I want to make an electronic
picture/photo frame (so I can change the photo using SDCARD or other
solid state disk). So I need to have JPEG decoder (the GPL ones..since
this is just for my fun..).

So I'm thinking to port libJPEG for ATMega128. But this libJPEG use
Linux/Unix and 32-bits processors.

So, my second question is : did anyone have some success for this idea
? :-)

Thank you so much for your help.

-daniel