Look at http://linuxdevices.com/
... little linux systems,
...single board systms
... and so on ... :-)
<lnx> skrev i en meddelelse
news:41a09982$0$24380$afc38c87@news.optusnet.com.au...
> I'm looking for a Linux compatible small microcontroller/microprocessor
> board with the following specs to control a model aircraft
>
> * RS232 serial I/O ports (min 2 ports, 115200 Baud)
> * Parallel I/O ports (min 8 bits PIO)
> * Analog to Digital Converter (min 3 input channels with 10 bit or more
> resolution)
> * R/C servo motor driver function (being able to drive simultaneously
> min 8 R/C servo motors)
> * 802.11 a/b/g wireless network support
> * Low power requirement
> * Small size
>
> Any recommendation?
>
> Thx.
>
>
>
Reply by ●November 21, 20042004-11-21
On Mon, 22 Nov 2004 00:34:52 +1100, <lnx> wrote:
>I'm looking for a Linux compatible small microcontroller/microprocessor
>board with the following specs to control a model aircraft
> * RS232 serial I/O ports (min 2 ports, 115200 Baud)
> * Parallel I/O ports (min 8 bits PIO)
> * Analog to Digital Converter (min 3 input channels with 10 bit or more
> resolution)
> * R/C servo motor driver function (being able to drive simultaneously
> min 8 R/C servo motors)
> * 802.11 a/b/g wireless network support
> * Low power requirement
> * Small size
>Any recommendation? Thx.
Not sure about about the ADC channels, but you can check out the
details
ARM920T with MMU - 200MHz
2 inch x 3 inch board
Linux 2.6 and WinCE 4.2 development kits
Up to 128MB SDRAM/Flash
USB HOST and DEVICE
LCD and touch interface
http://www.es-usa.com/index.cfm?action=showsingnews&entrid=441
Sorry, no pricing information available online.
Reply by RusH●November 21, 20042004-11-21
<lnx> wrote :
> I'm looking for a Linux compatible small
> microcontroller/microprocessor board with the following specs to
> control a model aircraft
>
> * RS232 serial I/O ports (min 2 ports, 115200 Baud)
> * Parallel I/O ports (min 8 bits PIO)
> * Analog to Digital Converter (min 3 input channels with 10
> bit or more
> resolution)
> * R/C servo motor driver function (being able to drive
> simultaneously
> min 8 R/C servo motors)
> * 802.11 a/b/g wireless network support
> * Low power requirement
> * Small size
>
> Any recommendation?
asus wl500G
minipci + uart + host usb + full LPT + some spare gpio + 4mb flash
running 200mhz mips
Pozdrawiam.
--
RusH //
http://randki.o2.pl/profil.php?id_r=352019
Like ninjas, true hackers are shrouded in secrecy and mystery.
You may never know -- UNTIL IT'S TOO LATE.
Reply by ●November 21, 20042004-11-21
I'm looking for a Linux compatible small microcontroller/microprocessor
board with the following specs to control a model aircraft
* RS232 serial I/O ports (min 2 ports, 115200 Baud)
* Parallel I/O ports (min 8 bits PIO)
* Analog to Digital Converter (min 3 input channels with 10 bit or more
resolution)
* R/C servo motor driver function (being able to drive simultaneously
min 8 R/C servo motors)
* 802.11 a/b/g wireless network support
* Low power requirement
* Small size
Any recommendation?
Thx.