Reply by rickman March 20, 20062006-03-20
Hans-Bernhard Broeker wrote:
> Ulf Samuelsson <ulf@a-t-m-e-l.com> wrote: > > Hans-Bernhard Broeker wrote: > > > rickman <spamgoeshere4@yahoo.com> wrote: > > >> Hans-Bernhard Broeker wrote: > > >>> rickman <spamgoeshere4@yahoo.com> wrote: > > >>>> to a RAID drive. This was pretty good for 10 years ago in a > > >>>> standard PC running Windows2K. > > > > > >>> You've thus admitted to secretly owning a time machine. Or how > > >>> else would you have had access to Win2K 10 years ago? > > > Maybe he is a dog ;-) > > A dog year is much shorter... > > Unlikely, because of contradiction to the well-known fact that "On > USENET, nobody knows you're a dog." So, if Rickman were a dog, and we > knew that, then he could not be on USENET. His postings are evidence > to the contrary. So he can't be a dog. ;-> > > [Any possible resemblance between this argument and the famous > disproof of God's existence by example of the Bablefish is most > definitely not a coincidence.]
Woof!
Reply by Hans-Bernhard Broeker March 19, 20062006-03-19
Ulf Samuelsson <ulf@a-t-m-e-l.com> wrote:
> Hans-Bernhard Broeker wrote: > > rickman <spamgoeshere4@yahoo.com> wrote: > >> Hans-Bernhard Broeker wrote: > >>> rickman <spamgoeshere4@yahoo.com> wrote: > >>>> to a RAID drive. This was pretty good for 10 years ago in a > >>>> standard PC running Windows2K. > > > >>> You've thus admitted to secretly owning a time machine. Or how > >>> else would you have had access to Win2K 10 years ago?
> Maybe he is a dog ;-) > A dog year is much shorter...
Unlikely, because of contradiction to the well-known fact that "On USENET, nobody knows you're a dog." So, if Rickman were a dog, and we knew that, then he could not be on USENET. His postings are evidence to the contrary. So he can't be a dog. ;-> [Any possible resemblance between this argument and the famous disproof of God's existence by example of the Bablefish is most definitely not a coincidence.] -- Hans-Bernhard Broeker (broeker@physik.rwth-aachen.de) Even if all the snow were burnt, ashes would remain.
Reply by linnix March 19, 20062006-03-19
Ulf Samuelsson wrote:
> Martin Maurer wrote: > > Hello, > > > > i am in the need to capture around 10 seconds (ok, 5 to 8 seconds > > would also be enough) with 25 MSamples / s. Each sample should be 4 > > to 8 digital lines. It would be nice if i can use an external clock. > > > > But how to do this ? The amount of data for 10s * 25 MSamples / s * 1 > > Byte = 250 MByte. So it is not a small amount !?! > > > > So at the moment i have 3 ideas to solve this: > > > > The question is if you want to build a one off, or if you are going to do > multiple chips. > > If it is a one off, then you may be able to adopt the Gigatrace function > of a Green Hills or Lauterbach Probe. > They have 1 GB of DRAM. > It will cost you, but maybe developing something will cost as well. > > Spartan-3 Memory Interface Board (HW-S3-SL361) is a Xilinx Development > Board @ $995. > containing 64 MB DDR SDRAM and it looks like you can add another 128 MB.
Alternatively, you can use the $150 Xilinx starter kit with 1M SRAM buffer. You can fill several parallel flash chips or modules from the buffer. Newer compact flash can sustain 5 to 10MB/s. 3 to 5 parallel units should be enough for you. You don't even need to build a PCB, One of our customer just wire-wrap some .1" connectors from the starter kit to standard IDE cables. That way, they can test multiple CFs at the same time. Those multi-G CFs takes a long time to test.
> > -- > Best Regards, > Ulf Samuelsson > ulf@a-t-m-e-l.com > This message is intended to be my own personal view and it > may or may not be shared by my employer Atmel Nordic AB
Reply by Ulf Samuelsson March 19, 20062006-03-19
Hans-Bernhard Broeker wrote:
> rickman <spamgoeshere4@yahoo.com> wrote: >> Hans-Bernhard Broeker wrote: >>> rickman <spamgoeshere4@yahoo.com> wrote: >>>> to a RAID drive. This was pretty good for 10 years ago in a >>>> standard PC running Windows2K. > >>> You've thus admitted to secretly owning a time machine. Or how >>> else would you have had access to Win2K 10 years ago? >
Maybe he is a dog ;-) A dog year is much shorter... -- Best Regards, Ulf Samuelsson ulf@a-t-m-e-l.com This message is intended to be my own personal view and it may or may not be shared by my employer Atmel Nordic AB
Reply by rickman March 19, 20062006-03-19
Hans-Bernhard Broeker wrote:
> rickman <spamgoeshere4@yahoo.com> wrote: > > Hans-Bernhard Broeker wrote: > > > rickman <spamgoeshere4@yahoo.com> wrote: > > > > to a RAID drive. This was pretty good for 10 years ago in a standard > > > > PC running Windows2K. > > > > You've thus admitted to secretly owning a time machine. Or how else would > > > you have had access to Win2K 10 years ago? > > > Oh jeeze, now I am going to have to kill everyone who reads your post. > > More to the point, you'ld have to kill everyone who read yours, > because there's no way of knowing who among those masses will come to > the same conclusion I arrived at, so you'll have to obliterate them > all just in case. It'd probably be simpler to go back in time and > bang yourself over the head the moment before you wrote that fatal > posting, though ;-) > > > No, wait! It was NT. Isn't Win2k just NT ver 5 and XP just NT ver 6? > > Close, but no doughnut. XP is NT 5.1
So my Win2k is really XP -0.1? OUCH! Seems I set the dials wrong, went forward in time about 10 seconds and banged myself on the head. I need to be more careful, THAT HURT! 8-*
Reply by Hans-Bernhard Broeker March 19, 20062006-03-19
rickman <spamgoeshere4@yahoo.com> wrote:
> Hans-Bernhard Broeker wrote: > > rickman <spamgoeshere4@yahoo.com> wrote: > > > to a RAID drive. This was pretty good for 10 years ago in a standard > > > PC running Windows2K.
> > You've thus admitted to secretly owning a time machine. Or how else would > > you have had access to Win2K 10 years ago?
> Oh jeeze, now I am going to have to kill everyone who reads your post.
More to the point, you'ld have to kill everyone who read yours, because there's no way of knowing who among those masses will come to the same conclusion I arrived at, so you'll have to obliterate them all just in case. It'd probably be simpler to go back in time and bang yourself over the head the moment before you wrote that fatal posting, though ;-)
> No, wait! It was NT. Isn't Win2k just NT ver 5 and XP just NT ver 6?
Close, but no doughnut. XP is NT 5.1 -- Hans-Bernhard Broeker (broeker@physik.rwth-aachen.de) Even if all the snow were burnt, ashes would remain.
Reply by rickman March 19, 20062006-03-19
Hans-Bernhard Broeker wrote:
> rickman <spamgoeshere4@yahoo.com> wrote: > > to a RAID drive. This was pretty good for 10 years ago in a standard > > PC running Windows2K. > > You've thus admitted to secretly owning a time machine. Or how else would > you have had access to Win2K 10 years ago? > > ;->
Oh jeeze, now I am going to have to kill everyone who reads your post. No, wait! It was NT. Isn't Win2k just NT ver 5 and XP just NT ver 6? Whew! Glad I avoided that one. It would have been a lot of extra work to clean up that mess... ;->
Reply by Hans-Bernhard Broeker March 19, 20062006-03-19
rickman <spamgoeshere4@yahoo.com> wrote:
> to a RAID drive. This was pretty good for 10 years ago in a standard > PC running Windows2K.
You've thus admitted to secretly owning a time machine. Or how else would you have had access to Win2K 10 years ago? ;-> -- Hans-Bernhard Broeker (broeker@physik.rwth-aachen.de) Even if all the snow were burnt, ashes would remain.
Reply by rickman March 19, 20062006-03-19
I am not clear on your requirements for reading the data once you
capture it.  In one place you mention slow reading of the data by an
AVR but with the USB you talk like the data must be read at the full 25
MB/s rate.

If you need a high speed interface to a PC, you may need to either use
USB or PCI.  I did a design once that captured data at up to 50 MSPS
with samples up to 8 bits wide on a PCI card.  We used an FPGA, a four
bank SDRAM and a PCI interface chip.  Data was buffered to make a 32
bit word which was written to memory at 33 MHz (the PCI rate).  FIFO
buffers isolated the two clock rates and allowed transfers to SDRAM to
be bursted since you transfer data on every clock cycle only after some
setup.  Once a bank was full, the writing moved to the next bank and
the first bank was read out through the PCI chip by the PC and written
to a RAID drive.  This was pretty good for 10 years ago in a standard
PC running Windows2K.

The SDRAM controller was done in the same FPGA and refresh was not at
all hard to do.  As someone else said, if you access all rows within
the refresh period, either 2, 4, 8 or 16 ms depending on the chips,
then you don't need to refresh it.  Just read the SDRAM data sheet
carefully.  A memory controller is not at all hard.

The size of memory that you need is not all that large.  256 MB is just
one module or maybe just two chips.  If you were doing the software, I
think I could have the board designed in a couple of weeks ready for
layout and have the FPGA code done before the assembled boards were in
house.  It really is not all that hard of a design.

I expect the memory module is a bad idea because the interface is very
high speed and hard to design to.  They are pushing the limits of
commercial design and fabrication to get >400 MHz busses to work
reliably with multiple memory module types.  It would be difficult to
meet all the SI issues with a custom board in a standard motherboard
memory slot I think.

Another interface you might consider is the ATA disk drive interface.
They run at speeds from 33 MB/s up to >=133 MB/s.  Parallel ATA is
still very common and not hard to use at your speeds.  Serial ATA is
available and offers much higher data rates with a very small cable.  I
don't know much about how hard it is to design to.  I don't know that
standard FPGAs will directly support SATA.


Martin Maurer wrote:
> Hello, > > i am in the need to capture around 10 seconds (ok, 5 to 8 seconds would also > be enough) with 25 MSamples / s. Each sample should be 4 to 8 digital lines. > It would be nice if i can use an external clock. > > But how to do this ? The amount of data for 10s * 25 MSamples / s * 1 Byte = > 250 MByte. So it is not a small amount !?! > > So at the moment i have 3 ideas to solve this: > > 1) FPGA with SRAM: SRAM in this size is expensive. > > 2) FPGA with DRAM. I think i saw a page where a DRAM was connected to an > AVR. AVR can handle only static RAM. But i think i need an dram memory > controller for doing the refresh. Are there ready to use chips or programmed > CPLD's or FPGA solutions which can do this ? So i can put a second FPGA (or > even the same) to collect the data very fast and i read them out via PC in a > slow way. > > 3) I found digitial IO card with PCI interface. But usually they are using > io access, to the bandwidth is very limited (don't reach the 25 MByte/s). > Are there faster memory accessable IO card, which can transfer 25 MBytes/s > into pc memory ? I think i must forget the external clock, because PC is not > synchronitzed to external clock... Are there much faster ones ? E.g. with 50 > MHz ? > > 4) Another new idea: Do you think it is possible to add a own build memory > module (DIMM), but instead of memory modules, add own circutry to external > world. I think then you can do some kind of memcpy from one module the real > main memory. Found a news article where such an idea was realized to connect > an FPGA to a PC and do crypt algorithms. But they used a modified linux, > because OS isn't allowed to use the memory area. > > 5) USB 2.0 (high speed) board, but i think also there it is very difficult > to reach / sample with 25 MByte/s... > > What do you think about this ? Any other solutions ? > > Regards, > > Martin
Reply by Ulf Samuelsson March 18, 20062006-03-18
Martin Maurer wrote:
> Hello, > > i am in the need to capture around 10 seconds (ok, 5 to 8 seconds > would also be enough) with 25 MSamples / s. Each sample should be 4 > to 8 digital lines. It would be nice if i can use an external clock. > > But how to do this ? The amount of data for 10s * 25 MSamples / s * 1 > Byte = 250 MByte. So it is not a small amount !?! > > So at the moment i have 3 ideas to solve this: >
The question is if you want to build a one off, or if you are going to do multiple chips. If it is a one off, then you may be able to adopt the Gigatrace function of a Green Hills or Lauterbach Probe. They have 1 GB of DRAM. It will cost you, but maybe developing something will cost as well. Spartan-3 Memory Interface Board (HW-S3-SL361) is a Xilinx Development Board @ $995. containing 64 MB DDR SDRAM and it looks like you can add another 128 MB. -- Best Regards, Ulf Samuelsson ulf@a-t-m-e-l.com This message is intended to be my own personal view and it may or may not be shared by my employer Atmel Nordic AB