--- In , "tsvetanusunov" <tusunov@m...> wrote:
> Hello Ron,
> > c- i cannot get it to work via the IAR debugger, not in ram or
> > i can activate relay, on/off and toggle leds, but cannot
> > push-buttons and LCD screen to work??? In the IAR debugger there
> > complete strange behavior, e.g. IOPIN is not refecting the
> > status!!!
> > d- when i make a .hex file with EWARM and download it with Philips
> > it works fine!!!
> everything is fine :) just read the LPC2106 manual, when JTAG is
> enabled all ports above P0.16 are not available and set to secondary
> JTAG function, as LCD and buttons use ports above P0.16 you can't use
> them while you debug.
> Best regards
> PCB prototypes for $26 at http://run.to/pcb
> PCB any volume assembly (http://www.olimex.com/pcb/protoa.html)
> Development boards for ARM, AVR, PIC, and MSP430
Tsvetan, Thanks a lot, This will end my ethernal search. regards ron