> Why don't you switch to Linux? Same tools, much
faster when compiling and no hassles like these (and no viruses etc).
I have more soft which don't work under Linux.
Reply by vbuyakov●September 28, 20092009-09-28
> Why don't you switch to Linux? Same tools, much
faster when compiling and no hassles like these (and no viruses etc).
I have more sowt which don't work under Linux
Reply by Ewout●September 28, 20092009-09-28
--- In A..., "vbuyakov" wrote: >
> --- In A..., "g s" wrote:
> >
> > I have a development station (WinXP Pro SP3) that is setup to use the
YAGARTO tool chain under Eclipse (following the directions on the www.yagarto.de
website).
> >
> > I would like to keep cygwin installed on this computer, but need YAGARTO
working again right away so that I can continue building and debugging an
AT91SAM9263 project. Does anyone know how I can select the YAGARTO toolchain
when I create new projects.
> Hello, all! I have same problem! And more if i use functions from
> stdio.h, for example iprintf i have linker error :(
>
Why don't you switch to Linux? Same tools, much faster when compiling and
no hassles like these (and no viruses etc).
Ewout
Reply by vbuyakov●September 26, 20092009-09-26
--- In A..., "g s" wrote: >
> I have a development station (WinXP Pro SP3) that is setup to use the YAGARTO
tool chain under Eclipse (following the directions on the www.yagarto.de
website).
>
> I would like to keep cygwin installed on this computer, but need YAGARTO
working again right away so that I can continue building and debugging an
AT91SAM9263 project. Does anyone know how I can select the YAGARTO toolchain
when I create new projects. Hello, all! I have same problem! And more if i use functions from
stdio.h, for example iprintf i have linker error :(
Reply by g s●September 23, 20092009-09-23
I have a development station (WinXP Pro SP3) that is setup to use the YAGARTO
tool chain under Eclipse (following the directions on the www.yagarto.de
website).
I recently installed cygwin on the same machine, but now I am unable create new
projects that use the YAGARTO tool chain. One of the projects I created before
installing cygwin, still works and compiles using YAGARTO (the selected
toolchain is, "No ToolChain"). But all of the projects I have created since can
not access YAGARTO. There is no YAGARTO option listed under 'New->C
Project-> Toolchains' or under 'Project->Properties->C/C++
Build->Tool> Chain Editor' (Cygwin, Linux, MacOS, WinGW, and Solaris GCC
all show-up however). Before I installed cygwin, 'No ToolChain' showed
up in both the 'New->C Project-> Toolchains' and
'Project->Properties->C/C++ Build->Tool Chain Editor' drop downs (fyi
in the old project, if I uncheck "Display compatible toolchains only" then all
of the above mentioned tool chains show-up including "No ToolChain").
I checked my Windows PATH and cygwin is not even listed. It was listed first in
the PATH variable inside Eclipse. I reversed the order putting yagarto first,
but the behavior remains the same.
I would like to keep cygwin installed on this computer, but need YAGARTO working
again right away so that I can continue building and debugging an AT91SAM9263
project. Does anyone know how I can select the YAGARTO toolchain when I create
new projects.