Reply by Marcelo Richter●January 21, 20102010-01-21
Program hanging where? It generates an abort exception and, maybe, stays there
in a loop?
Stack problems?
Removing RTC alarm setting it works ok?
Marcelo
From: l... [mailto:l...] On Behalf Of pra bu
Sent: quarta-feira, 20 de janeiro de 2010 12:08
To: l...
Subject: Re: [lpc2000] RTC Issue in LPC2364
Is anyone having this Issue??
_____
From: "p...@yahoo.co.in"
To: l...
Sent: Wed, 20 January, 2010 10:58:53 AM
Subject: [lpc2000] RTC Issue in LPC2364
Hi all,
I am using LPC2364 with FreeRTOS,GNUARM.
Issue:
I have Set RTC Alarm to one minute.After setting
RTC suddenly,My program hanging(after task_exit critical()). But in LPC2103 its
working.Which means getting RTC alarm interrupt after one minute.Is there
any different between LPC21xx and 23xx RTC Setting.Please share your
knowledge???
Interrupt priority only differs between 21xx and 23xx.
In 2103,
VICVectAddr2 = (unsigned long)RTCISR;
VICVectCntl2 = 0x20 | 13;
VICIntEnable |= (1 << 13);
________________________________
From: "p...@yahoo.co.in"
To: l...
Sent: Wed, 20 January, 2010 10:58:53 AM
Subject: [lpc2000] RTC Issue in LPC2364
Hi all,
I am using LPC2364 with FreeRTOS,GNUARM.
Issue:
I have Set RTC Alarm to one minute.After setting
RTC suddenly,My program hanging(after task_exit critical()). But in LPC2103 its
working.Which means getting RTC alarm interrupt after one minute.Is there
any different between LPC21xx and 23xx RTC Setting.Please share your
knowledge???
Interrupt priority only differs between 21xx and 23xx.
In 2103,
VICVectAddr2 = (unsigned long)RTCISR;
VICVectCntl2 = 0x20 | 13;
VICIntEnable |= (1 << 13);
The INTERNET now has a personality. YOURS! See your Yahoo! Homepage.
http://in.yahoo.com/
Reply by prab...@yahoo.co.in●January 20, 20102010-01-20
Hi all,
I am using LPC2364 with FreeRTOS,GNUARM.
Issue:
I have Set RTC Alarm to one minute.After setting
RTC suddenly,My program hanging(after task_exit critical()).But in LPC2103 its
working.Which means getting RTC alarm interrupt after one minute.Is there
any different between LPC21xx and 23xx RTC Setting.Please share your
knowledge???
Interrupt priority only differs between 21xx and 23xx.
In 2103,
VICVectAddr2 = (unsigned long)RTCISR;
VICVectCntl2 = 0x20 | 13;
VICIntEnable |= (1 << 13);